IEDX-100G Electroplating Solution Ion Concentration Spectrometer Introduction: Closely monitoring the changes in the composition of the electroplating solution and adjusting them in a timely manner is the foundation of good electroplating. However, methods such as atomic absorption spectroscopy or chemical titration have always had problems such as operational difficulties, multiple interference factors, and large errors; This spectrometer can effectively solve these problems by selecting different target materials and algorithms to solve substrate interference, and can simultaneously measure coexisting element content. It can also customize online detection solutions according to the production line, making it the best choice for measuring metal ions in plating solutions. The iEDX-100G electroplating solution ion concentration spectrometer can quickly and accurately measure the concentration of metal ions in the electroplating solution, without the need for sample pretreatment or waste liquid treatment, making it convenient and fast. characteristic: 1. Quickly and accurately determine the concentration of metal ions in the electroplating solution, without the need for professional background; 2. No need for gas assistance or protective gas, no waste liquid treatment; 3. Easy to operate, no need for sample pre-treatment, inorganic testing, and test results can be obtained within a few minutes; 4. 12 position sampler, capable of simultaneously analyzing and monitoring data from multiple production lines and multiple tank solutions; 5. The software can be integrated with the customer's on-site management system for easy management and monitoring; 6. The sample cup can be reused with almost no consumables or post use costs. Technical parameters: The range of elemental analysis ranges from aluminum (Al) to uranium (U); SDD silicon drift detector with an energy resolution of 130eV; Test concentration range: 1ppm~100%; Test time: 60-150 seconds; 12 bit fully automatic sampler
Introduction: Closely monitoring the changes in the composition of the electroplating solution and adjusting them in a timely manner is the foundation of good electroplating. However, methods such as atomic absorption spectroscopy or chemical titration have always had problems such as operational difficulties, multiple interference factors, and large errors; This spectrometer can effectively solve these problems by selecting different target materials and algorithms to solve substrate interference, and can simultaneously measure coexisting element content. It can also customize online detection solutions according to the production line, making it the best choice for measuring metal ions in plating solutions. The iEDX-100G electroplating solution ion concentration spectrometer can quickly and accurately measure the concentration of metal ions in the electroplating solution, without the need for sample pretreatment or waste liquid treatment, making it convenient and fast.
