Introduction: HY-VIDU3 soot detector is specially designed and manufactured for the detection of dust or harmful gases in industrial plants. It can also detect parameters such as soot or dust concentration, carbon monoxide concentration and nitric oxide concentration in the working area of the plant. According to the special gas to be tested in the plant, a gas sensing probe corresponding to the gas sensor is installed. HY-VIDU3 uses three detection methods to detect three types of data in real time. Due to its unique design and manufacturing process, its installation and commissioning is simple and convenient, and the anti-corrosion process is applied from both the inside and the outer casing, thus ensuring that the detector works very stably and requires little maintenance. Applicable occasions: real-time online monitoring of soot in industrial plants; environmental monitoring during construction in tunnels or tunnels; environmental monitoring in special workshops Features: 1. All test units are mounted in a rugged metal enclosure for normal operation in harsh industrial environments 2. High precision detection method 3. Direct continuous measurement 4. No moving parts - small maintenance 5. Simple installation and debugging Technical Parameters: Detection principle: optical scattering method, electrochemistry Type of detection: soot concentration, carbon monoxide, nitric oxide (optional one) Detection range: soot concentration: 0-500μg/m3 CO: 0-300ppm NO: 0-100ppm Response time: 1 second Digital output: RS485/232 Analog output: 4 channels 4-20mA Switch output: 2 way switch Working temperature: -20 -50 °C Working humidity: 0-99% Supply voltage: 12-24VDC Communication protocol: MODBUS RTU/ASCII Dimensions: 200 × 100 × 60 mm (length × width × thickness)
Introduction: HY-VIDU3 soot detector is specially designed and manufactured for the detection of dust or harmful gases in industrial plants. It can also detect parameters such as soot or dust concentration, carbon monoxide concentration and nitric oxide concentration in the working area of the plant. According to the special gas to be tested in the plant, a gas sensing probe corresponding to the gas sensor is installed. HY-VIDU3 uses three detection methods to detect three types of data in real time. Due to its unique design and manufacturing process, its installation and commissioning is simple and convenient, and the anti-corrosion process is applied from both the inside and the outer casing, thus ensuring that the detector works very stably and requires little maintenance. Applicable occasions: real-time online monitoring of soot in industrial plants; environmental monitoring during construction in tunnels or tunnels; environmental monitoring in special workshops
