Brief introduction: The machine is suitable for inspection of finished shoes and shoe sole folding properties of at room temperature, its principle is to put the shoes or sole folding test machine, installed in a certain frequency by march around the test, the measurement of the sole and figure in a curved around the number after the crack length does (mouth) and glue, and observe the change of the upper, with power off memory function. Features: Mechanical transmission adopts eccentric bearing, no need to add lubricating oil, simple maintenance, low noise The use of special jig design: Fixture: use linear linear guide, can adapt to the special big yards, holding small yards of shoes; Fixture: through different positioning hole, can adapt to different high and low shoes head clamping requirements, locking device adopts the external rotary method, easy to use. Technical indicators: 1. The test number: 4 2. The bending Angle: 0 ~ 55 ° is adjustable 3. The test speed: 230 + 10 CPM (50 ~ 300 + 10 CPM) is adjustable 4. The test blast apparatus: casting line 1 / location 5. The counter: LCD - 999999 6. Size: 153 * 87 * 140 cm 7. Weight: 530 kg 8. Power supply: AC220V 50 hz
Brief introduction: The machine is suitable for inspection of finished shoes and shoe sole folding properties of at room temperature, its principle is to put the shoes or sole folding test machine, installed in a certain frequency by march around the test, the measurement of the sole and figure in a curved around the number after the crack length does (mouth) and glue, and observe the change of the upper, with power off memory function.
