Introduction: This tester is used to determine whether the liquid added to the inert carrier will burn when exposed to air, or whether the filter paper will turn into carbon black or burn when exposed to air. It conforms to 33.3.1.5 test n.3: Test Method for pyrotechnic liquid in the United Nations Recommendations on the transport of dangerous goods - Manual of tests and standards. characteristic: 1) Embedded processor and windows CE operating system are adopted; 2) 8 inch LCD touch screen can display the test status in real time; 3) Equipped with filter paper carbon black automatic detection device; 4) Equipped with nanosecond photosensitive sensor detection module to detect light intensity changes; 5) The instrument is mainly composed of test bench and control part, which can automatically judge whether the test material is burning or not; 6) During the test, if the material burns or does not burn after reaching the test time, the equipment will give an alarm automatically to remind the operator of the end of the test; 7) Flexible choice of exposure to air mode test and filter paper mode test; 8) The test process is fully automated, without manual intervention, supporting parameter setting, data storage, viewing reports and other functions; 9) Equipped with temperature and humidity module, it can monitor the temperature and humidity of the test environment in real time. If the environment temperature and humidity are not suitable for the experiment, the system will automatically remind users. Technical parameters: Working environment: < 45-95) ℃ Timing range: (0-999) s Timing display resolution: 1s Ambient temperature measurement range: (- 10 ～ + 60) ℃ Measurement accuracy of ambient temperature: ± 0.5 ℃ Measurement range of environmental humidity: (5-95)% RH Measurement accuracy of ambient humidity: ± 5.0% RH
Introduction: This tester is used to determine whether the liquid added to the inert carrier will burn when exposed to air, or whether the filter paper will turn into carbon black or burn when exposed to air. It conforms to 33.3.1.5 test n.3: Test Method for pyrotechnic liquid in the United Nations Recommendations on the transport of dangerous goods - Manual of tests and standards.
