Introduction: This tester is used to test whether solid substance burns when contacting with air. It is in accordance with 33.3.1.4 test N.2: Test Method for ignitable solids in the United Nations "recommendations on the transport of dangerous goods - Manual of tests and standards" and GB / T 21611-2008 "test method for spontaneous combustion of flammable solids of dangerous goods". characteristic 1) Embedded processor and windows CE operating system are adopted; 2) 8 inch LCD touch screen can display the test status in real time; 3) Equipped with nanosecond photosensitive sensor detection module to detect light intensity changes; 4) The instrument is mainly composed of test bench and control part, which can automatically judge whether the test material is burning or not; 5) During the test, if the material burns or does not burn after reaching the test time, the equipment will give an alarm automatically to remind the operator of the end of the test; 6) Equipped with automatic shaking drop device, rapid and thorough injection; 7) Equipped with low thermal conductivity marble experimental platform, long life, easy to clean; 8) The test process is fully automated, without manual intervention, supporting parameter setting, data storage, viewing reports and other functions. Technical parameters: Working environment: < 45-95) ℃ Timing range: (0-999) s Timing display resolution: 1s Drop height: 1m Combustion detection response time: ≤ 6ms
Introduction: This tester is used to test whether solid substance burns when contacting with air. It is in accordance with 33.3.1.4 test N.2: Test Method for ignitable solids in the United Nations "recommendations on the transport of dangerous goods - Manual of tests and standards" and GB / T 21611-2008 "test method for spontaneous combustion of flammable solids of dangerous goods".
