Introduction: This tester evaluates the corrosiveness of a sample by detecting the mass loss and erosion depth of the sample on a metal sheet and is applicable to liquids and solid substances that may become liquid during transport. Compliance with the UN Recommendations on the Transport of Dangerous Goods Manual of Tests and Criteria 37.4.1.1 Test C.1: Tests are used to identify liquids and solid substances that may become liquid during transport (Class 8 Dangerous Goods, Class III Packaging) corrosive and GB / T21621-2008 "Hazardous Materials Metal Corrosion Test Method." Features: 1) using embedded processor, WindowsCE operating system; 2) 8-inch LCD touch screen, real-time display test status; 3) Constant temperature water tank temperature control, temperature control accuracy of ± 1 ℃; 4) The inner spiral condenser is connected with the standby water tank to realize the automatic circulation of condensed water, so as to effectively reduce the sample volatilization; 5) U-shaped heating pipe, water bath heating cycle, to ensure that the average temperature; 6) The sample level automatic detection function, real-time detection of sample level to ensure timely fill samples; 7) Water tank intelligent automatic replenishment function, to achieve effective control of water and water temperature; 8) equipment failure automatic detection and sound and light alarm function to ensure that the test more secure; 9) 0-28 days of uninterrupted testing, the whole without human intervention, effectively reducing the intensity of the test work; 10) During the test, real-time display of running time, real-time temperature, so that the entire test process at a glance; 11) Test process fully automated, without human intervention, support for parameter settings, data storage, view reports and other functions. Technical Parameters 1) Working environment: 5 ℃ ~ 30 ℃, <85% RH 2) Temperature range: 30 ℃ ~ 80 ℃ 3) temperature control accuracy: ± 1 ℃ 4) Average temperature: ± 0.5 ℃ 5) Timing range: 0-28 days 6) timing display resolution: 1Minute 7) Sample container volume: 3000mL, effective volume 2000mL
Introduction: This tester evaluates the corrosiveness of a sample by detecting the mass loss and erosion depth of the sample on a metal sheet and is applicable to liquids and solid substances that may become liquid during transport. Compliance with the UN Recommendations on the Transport of Dangerous Goods Manual of Tests and Criteria 37.4.1.1 Test C.1: Tests are used to identify liquids and solid substances that may become liquid during transport (Class 8 Dangerous Goods, Class III Packaging) corrosive and GB / T21621-2008 "Hazardous Materials Metal Corrosion Test Method."