Introduction: This tester evaluates the corrosion risk of the sample by detecting the mass loss and the depth of corrosion caused by the sample to the metal sheet. It is suitable for liquids and solid substances that may become liquids during transportation. 1) This tester evaluates the corrosive hazard of the sample by detecting the mass loss and the depth of corrosion caused by the sample on the metal sheet. It is suitable for liquids and solid substances that may become liquid during transportation. 2) Comply with UN "Recommendations on the Transport of Dangerous Goods-Manual of Tests and Standards" 37.4.1.1 Test C.1: Tests are used to determine liquids and solid substances that may become liquids during transportation (Class 8 dangerous goods, Type Ⅲ packaging) and GB/T 21621-2008 "Test Method for Corrosion of Dangerous Goods Metals". Features: 1) Use embedded processor, Windows CE operating system; 2) 8-inch LCD touch screen can display test status in real time; 3) The constant temperature water tank automatically controls the temperature, and the temperature control accuracy is up to ±1℃; 4) The inner spiral condenser is connected with the spare water tank to realize the automatic circulation of condensed water and effectively reduce sample volatilization; 5)Using U-shaped heating tube and circulating water bath to ensure temperature uniformity; 6) The sample liquid level automatic detection function, real-time detection of the sample liquid level to ensure timely replenishment; 7) The intelligent automatic water replenishment function of the water bath box realizes effective control of water volume and water temperature; 8) Equipment failure detection and sound and light alarm function to ensure safer testing; 9) The longest 30-day uninterrupted test, without manual intervention in the whole process, effectively reducing the intensity of test work; 10) During the test, the running time and real-time temperature are displayed in real time, making the whole test process clear at a glance; 11) The test process is fully automated, without manual intervention, and supports functions such as parameter setting, data storage, and report viewing. technical parameter: Working environment: (-5～45)℃, <95%RH Temperature control range: room temperature～80℃ Temperature control accuracy: ±1℃ Temperature uniformity: ±0.5℃ Timing range: (0～30) days Timing display resolution: 1Minute Sample container volume: 3000mL, effective volume 2000mL
Introduction: This tester evaluates the corrosion risk of the sample by detecting the mass loss and the depth of corrosion caused by the sample to the metal sheet. It is suitable for liquids and solid substances that may become liquids during transportation. 1) This tester evaluates the corrosive hazard of the sample by detecting the mass loss and the depth of corrosion caused by the sample on the metal sheet. It is suitable for liquids and solid substances that may become liquid during transportation. 2) Comply with UN "Recommendations on the Transport of Dangerous Goods-Manual of Tests and Standards" 37.4.1.1 Test C.1: Tests are used to determine liquids and solid substances that may become liquids during transportation (Class 8 dangerous goods, Type Ⅲ packaging) and GB/T 21621-2008 "Test Method for Corrosion of Dangerous Goods Metals".
