HTY-APL01 Smart Bacteria Collector Introduction: The HTY-APL01 Bacteria Collecting Apparatus is a new generation of intelligent Bacteria Collecting Apparatus with the functions of linear installation of pump pipes, automatic pipe clamping and pressure safety protection. With Steritailin® bacteria collection incubator, a sterile detection system can be constructed. Through the directional peristaltic pressure of the bacteria collection device, the test product is transferred to the incubator cup and filtered under positive pressure, and the microorganisms that may exist in the test product are filtered For membrane retention, wash the filter membrane (if necessary) to remove the antibacterial components of the test product, and then fill the filter with medium for culture to check whether the test product contains bacteria. The HTY bacteriostat can be widely used in the sterility inspection of sterile preparations, including antibiotics and preparations containing bacteriostatic ingredients, sterile raw materials, large infusions, water injections, sterilized medical devices, sterilized water for injection, etc. It can be used with membrane filters for microbial limit inspections in industries such as pharmaceuticals, food, and beverages. Features: 1. The ultra-small design reduces the occupied space and air flow of the ultra-clean operating table; 2. The pump pipe is installed in a straight line, with automatic pipe clamping design, which is easy to operate and can avoid the risk of pipe clamping caused by improper installation; 3. Glass operation panel, touch control, safe and beautiful, smooth and flat surface, easy to clean; 4. The speed control switch is located on the side of the fuselage to effectively prevent liquid from infiltrating; stepless speed control, with speed memory function; 5. Newly designed pump head and protective cover, with safety protection function, effectively avoiding damage to operators; 6. With pressure safety protection function, avoid the cup body damage and personal injury caused by excessive pressure in the cup body; 7. The stainless steel casing is mirror-treated, and the surface is smooth and smooth, which is convenient for cleaning and disinfection; 8. The foot switch with waterproof interface is convenient for experiment operation. 9. Rotatable angle drain tank, easy to use; 10. Over-current, over-voltage, overload, locked-rotor four-fold safety protection function; 11. Using brushless DC motor, high reliability, long life, no electrical contact sparks, safety and good explosion-proof. technical parameter : 1. Power supply: AC 220V/50Hz 2. Power: 90W 3. Speed: 15-300rpm 4. Total height of suspension: 38cm 5. Weight: 16㎏ 6. Dimensions: 22.5×40.0×11.2cm
Introduction: The HTY-APL01 Bacteria Collecting Apparatus is a new generation of intelligent Bacteria Collecting Apparatus with the functions of linear installation of pump pipes, automatic pipe clamping and pressure safety protection. With Steritailin® bacteria collection incubator, a sterile detection system can be constructed. Through the directional peristaltic pressure of the bacteria collection device, the test product is transferred to the incubator cup and filtered under positive pressure, and the microorganisms that may exist in the test product are filtered For membrane retention, wash the filter membrane (if necessary) to remove the antibacterial components of the test product, and then fill the filter with medium for culture to check whether the test product contains bacteria. The HTY bacteriostat can be widely used in the sterility inspection of sterile preparations, including antibiotics and preparations containing bacteriostatic ingredients, sterile raw materials, large infusions, water injections, sterilized medical devices, sterilized water for injection, etc. It can be used with membrane filters for microbial limit inspections in industries such as pharmaceuticals, food, and beverages.