Product introduction: The HTY-305S microbiological tester is a special microorganism inspection equipment designed and manufactured according to the relevant provisions of the Pharmacopoeia. The product uses a high-performance diaphragm pump, direct drainage, no need to pump the bottle, and can form a complete membrane filtration device with a special filter cup or limit cultivator through different pump heads. The test liquid is filtered through thin film when testing. The microbes in the test solution are intercepted on the filter membrane and then cultured to form the colonies that are visible to the naked eye and count to detect the bacteria content in the tested products. It is suitable for the microbiological examination of the products of water, medicine and beverage. Performance characteristics: 1. Built in three diaphragm pumps, fast filtration, low noise, direct drainage, no need for filter bottles, easy to use. 2. Color LCD display, date, time, pump running status, etc. 3. Toughened glass panel with touch key, easy to operate, smooth and smooth, easy to scratch and easy to clean. 4. Built-in automatic disinfection procedures, intelligent control equipment disinfection, simple and intuitive, effectively avoid misoperation; 5. It can set up filtering timing function independently, automatically memorize and operate conveniently. 6. A main engine can be used in conjunction with three kinds of pump heads. 7. Three pump heads can be started and stopped at the same time, and they can also be independently controlled and highly efficient. 8. Pump head is easily disassembled and can be sterilized at 121 centigrade. 9. The pump head can be quickly sterilized by flame spray gun, so as to facilitate continuous experimental operation. 10. Stainless steel shell is polished by mirror, the surface is smooth and smooth, easy to clean and disinfect. Technical parameters: 1. Power: AC 220V/50Hz 2. Power: 90W 3. Noise: less than 60dB (A) (load) 4. Flow: more than 1200ml/min (single pump head flow) 5. Weight: 10kg (PF47 pump head) / 11kg (PF60 pump head) / 12kg (PS60 pump head) 6. Shape size: 38 x 26 x 12cm (long x wide x high) 7. Applicable consumables: S60 incubator, F47/F47-250 filter cup (47mm 47mm), F60-250 filter cup (60mm membrane) 8. Culture or filter cup volume: 100ml/250ml Application areas: Pharmaceutical: purified water, injection water and other drugs and preparations microbial limit test; Disease control: the total number of bacteria in the air conditioning condensate, drinking water and other water quality checks, pathogenic bacteria detection; Food: beverage, mineral water, pure water count of the total number of colonies; Chemical: various samples of water samples that need to be tested for microbes.
Product introduction: The HTY-305S microbiological tester is a special microorganism inspection equipment designed and manufactured according to the relevant provisions of the Pharmacopoeia. The product uses a high-performance diaphragm pump, direct drainage, no need to pump the bottle, and can form a complete membrane filtration device with a special filter cup or limit cultivator through different pump heads. The test liquid is filtered through thin film when testing. The microbes in the test solution are intercepted on the filter membrane and then cultured to form the colonies that are visible to the naked eye and count to detect the bacteria content in the tested products. It is suitable for the microbiological examination of the products of water, medicine and beverage.