Brief introduction: The HTY-102 microbiological limit detector is a special equipment designed and manufactured according to the relevant regulations of Pharmacopoeia. It is small in volume, convenient in use, with high performance diaphragm pump built in, and directly drains liquid without the need for filter bottles. A complete membrane filter device can be formed by different pump heads combined with special filter cup or limited culture device. In order to detect the bacterial content in the sample, the test solution was filtered through the membrane, and the microorganism in the liquid was intercepted on the filter membrane, and then cultured to form a visible colony and counted to detect the amount of bacteria in the sample. Microbiological limit detector is especially suitable for microbial limit detection of purified water and water for injection, and can also be used for microbial loading detection of other samples. Performance features: 1. Single pump head design, small volume, easy to move; 2. Built-in miniature high performance diaphragm pump, no need to filter bottle, greatly reduce the occupation of operating table space, more convenient to use; 3. Button switch control with indicator light, simple and intuitive operation; 4. A main machine can be used with two pump heads, the choice space is larger, the performance price ratio is higher; 5. Pump head can be quickly disassembled, can be alone 121 ℃ hydrothermal sterilization; 6. The pump head can be quickly sterilized by flame, which is convenient for continuous experimental operation. 7. Stainless steel shell is polished by mirror, the surface is smooth and smooth, easy to clean and disinfect; Technical parameters: 1. Suitable for consumption: S60 microbial limit culture device F47 filter (Φ 47mm microporous membrane) 2. Volume of incubator or filter cup: 100ml 3. Power source: ac 220V/50Hz 4. Power: 25W 5. Flow: ≥ 1200 ml / min (pump flow) 6. Noise: ≤ 60dBX An (load) 7. Weight: 5kg 8. Shape size (length * width * height: 16cm × 23cm × 10cm) 9. Specification for drain hose: inner diameter Φ 7mm ~ Φ 9mm silicone hose Areas of application: 1. Pharmaceutical: microbial limit examination of purified water, injection water, raw material and oral liquid, tablets, capsules, biological products and preparations; 2. Disease control: air conditioning condensate water, drinking water and other water quality of the total number of bacteria inspection, pathogenic bacteria detection; 3. Food: total number of bacteria in beverage, mineral water and purified water; 4. Chemical industry: a variety of water samples to be tested for microbes.
Brief introduction: The HTY-102 microbiological limit detector is a special equipment designed and manufactured according to the relevant regulations of Pharmacopoeia. It is small in volume, convenient in use, with high performance diaphragm pump built in, and directly drains liquid without the need for filter bottles. A complete membrane filter device can be formed by different pump heads combined with special filter cup or limited culture device. In order to detect the bacterial content in the sample, the test solution was filtered through the membrane, and the microorganism in the liquid was intercepted on the filter membrane, and then cultured to form a visible colony and counted to detect the amount of bacteria in the sample. Microbiological limit detector is especially suitable for microbial limit detection of purified water and water for injection, and can also be used for microbial loading detection of other samples.
