Brief introduction: HTY-101 is used in conjunction with the FC501- series of endoscopy samplers. FC501- series of endoscopy sampler was used to seal the cup body after field sampling, and then transferred to the microorganism laboratory. The microorganism was cut off on the filter membrane and counted after culture by HTY-101 microorganism tester. It is suitable for endoscope microbial load detection in medical and health industry. Performance features: 1. Built-in miniature high-performance diaphragm pump, no need to filter bottle, greatly reduce the occupation of the operation table space, more convenient to use; 2. Button switch control with indicator light, simple and intuitive operation; 3. Simple internal pipeline, no microbial breeding dead corner, easy to clean and sterilize; 4. Stainless steel shell is polished by mirror, the surface is smooth and smooth, easy to clean and disinfect; Technical parameters: 1. Suitable for consumable material: FC501 series of endoscope testing sampler 2. Power source: ac 220V/50Hz 3. Power: 25W 4. Pump flow: 1.2L/min 5. Noise: ≤ 60dB (load status) 6. Weight: 2.5kg 7. Size: 40.5cm × 23cm × 12cm (length × width × height) 8. Specification for drain hose: inner diameter Φ 7mm ~ Φ 11mm silicone hose Areas of application: The microbiological tester HTY-101 is used for endoscopy sampling in the medical and health industry.
Brief introduction: HTY-101 is used in conjunction with the FC501- series of endoscopy samplers. FC501- series of endoscopy sampler was used to seal the cup body after field sampling, and then transferred to the microorganism laboratory. The microorganism was cut off on the filter membrane and counted after culture by HTY-101 microorganism tester. It is suitable for endoscope microbial load detection in medical and health industry.
