Brief introduction: Core part of the working principle of the pressurized system: pressure device by nitrogen gas bottle, sealed cavity, scales and other components of the pressure reducing valve, back pressure valve, nitrogen JingTianPing cavity at nitrogen gas path to the device under part of the heating furnace sealed cavity, through the relief valve and the adjustment of the back pressure valve pressure required to maintain system. 2. The heating system: the whole heating device by heat sealing furnace, the temperature measurement system and temperature control system, using in heating mode. 3. The tail gas treatment system: the whole device by the sealed cavity are installed on the exhaust passage of the heating furnace of condenser and gas-liquid separator. Residue of the reaction through channel to the condenser cooling processing, direct separator handle collection again. Technical indicators: Voltage stabilizing ways: through the back pressure valve and precise control system to keep 0.11 5 mpa pressure any range of pressure constant Regulated atmosphere: no corrosive gas 0.11 5 mpa pressure range: continuous adjustable Pressure control precision: + / - 0.01 Mpa Pressure limit: 50 bar Steam generator: standard contains integration of steam temperature, number, pressure, flow rate control system Balance: hanging high precision mechanical balance Scales measuring range: HTF - 500-0.1-500 mg HTF - 0.1-5 g Weighing accuracy: plus or minus 0.1% Weighing precision: plus or minus 0.01% Sensitivity: one over ten thousand Thermogravimetric range: no range control
Brief introduction: Core part of the working principle of the pressurized system: pressure device by nitrogen gas bottle, sealed cavity, scales and other components of the pressure reducing valve, back pressure valve, nitrogen JingTianPing cavity at nitrogen gas path to the device under part of the heating furnace sealed cavity, through the relief valve and the adjustment of the back pressure valve pressure required to maintain system.
