Introduction: HSZP series high-speed rotary tablet press can be widely used in the pharmaceutical industry, but also applicable to food, chemical, electronics and other industries. Various pellet raw materials that meet the requirements of tableting are pressed into tablets. The highest output reaches 300,000 tablets per hour. The use of pressed dry granular materials in this machine does not exceed 10% fines (greater than 100 mesh) and does not apply to semi-solid, moist particles, low-melting point, moisture-conducting raw materials and non-granular powders. This machine can not only suppress the round piece, but also suppress the geometric shaped piece and double-sided engraved piece. HSZP series high-speed rotary tablet press has four specifications, namely: HSZP35, HSZP43, HSZP53, HSZP57 (the technical specifications of the four specifications of the models are described below) customers can choose the right size according to their output, product size model. Features: 1. The maximum pressure of the machine is high, and the preloading device is set at the same time, which prolongs the pressing time and makes the quality of the tablet more consistent with the requirements. 2. The rotating speed of the turntable is high, double-sided pressing, the maximum output is 300,000 pieces per hour, and it can meet the requirements of high-volume production in pharmaceutical factories. 3. Pressure sensor is installed on the upper pressure wheel part, and the average working pressure of the tablet is accurately displayed through the amplifier and the display screen; at the same time, the maximum working pressure can be set. When the working pressure exceeds the set value, the machine will automatically stop in emergency and play a protective role. . 4. The main pressure, preloading and filling adjustment parts adopt displacement sensors, which are adjusted by the front 6 handwheels. 5. Lubrication part of the equipment adopts an automatic lubrication system such as electric lubrication pump and metering parts. It supplies oil to parts with relative frictional motion such as upper and lower guide rails, pressure rollers, punching bars and turntable holes, and can be touched and displayed in time according to actual work requirements. Adjust the frequency and time of lubrication on the screen to obtain the best lubrication, reduce noise, and extend the life of the parts. 6. The control part adopts a programmable controller and the operation panel uses a color touch screen, which is convenient and intuitive. Display screen as the user's operation interface, can display the main technical parameters, pressure averages, etc.; set the control parameters such as rotary table speed and other operating parameters, maximum working pressure, lubrication frequency and time; can quickly locate the fault point, display the cause of the fault and troubleshooting , improve maintenance efficiency. 7. Mechanical Parts: Material (Materials of Key Parts): The copper track material is cast with the latest formulation in China, which improves wear resistance. The top cover, turntable, track seat, track plate, and main body are cast by advanced technology of domestic enterprises. Through metallographic analysis, the internal molecular structure of the material is uniform, tight, free of bubbles, trachoma and cracks, and the internal pressure is reliable, and the surface of the casting body is smooth and smooth. 8. Processing technology of mechanical parts: The main parts such as copper track, top cover, turntable, track seat, and main body are all processed with precision machine tools (machining center), with high dimensional accuracy. 9. Improvement of the pressure roller and pressure roller frame structure: The pressure roller frame structure of this machine has changed the lever type (or pinch type) that is widely used in the current presses. The column type structure is adopted. The advantage is that the pressure points are concentrated. , Pressure, noise, small size and other advantages. Technical Parameters: Model: HSZP55 Number of rushes (pay): 55 Die form: IPT Maximum tableting pressure (kN): 80 Maximum pre-tabletting pressure (kN): 60 The maximum filling depth (mm): 18 The maximum tablet diameter (mm): 11 Maximum production capacity (when thousands of tablets): 27.00 Turntable maximum speed (transfer points): 45 Main motor power (kW): 7.5 Host height (mm): Without hopper 1750 With hopper 1900 Host area (mm2): 1170×1290 Host Weight (kg): 3500
HSZP series high-speed rotary tablet press can be widely used in the pharmaceutical industry, but also applicable to food, chemical, electronics and other industries. Various pellet raw materials that meet the requirements of tableting are pressed into tablets. The highest output reaches 300,000 tablets per hour. The use of pressed dry granular materials in this machine does not exceed 10% fines (greater than 100 mesh) and does not apply to semi-solid, moist particles, low-melting point, moisture-conducting raw materials and non-granular powders. This machine can not only suppress the round piece, but also suppress the geometric shaped piece and double-sided engraved piece. HSZP series high-speed rotary tablet press has four specifications, namely: HSZP35, HSZP43, HSZP53, HSZP57 (the technical specifications of the four specifications of the models are described below) customers can choose the right size according to their output, product size model.
