HSY-3536A automatic opening flash point tester Introduction: HSY-3536A automatic open flash point automatic tester (touch screen) is designed and manufactured according to the requirements of the People's Republic of China standard GB/T 3536-2008 "California open cup method for the determination of flash point and ignition point of petroleum products". The method specified in this standard measures the flash point of petroleum products other than fuel oil that have an open cup flash point above 79 °C. This instrument is an automatic open flash point tester. It is an ideal substitute for similar imported instruments and can be widely used in railway, aviation, electric power, petroleum industry and scientific research departments. Features: 1, using color LCD large screen display, touch screen keyboard, all Chinese man-machine dialogue interface, the expected flash point, sample label, atmospheric pressure, test date and other parameters. 2, with prompt menu, guided input function, there is operational knowledge prompt on the LCD screen. 3. The analog tracking shows the function curve of temperature rise and test time. It has the operation small knowledge interface and the Chinese misoperation software prompt function. The test date and test time parameters can be modified. 4, can store 10 screens, 120 sets of historical data. 5. Automatically correct the influence of atmospheric pressure on the test and calculate the correction value. 6, differential detection, system deviation automatically corrected. 7. The sweeping, detecting and printing data is automatically completed, and the test arm is automatically raised and dropped. Technical Parameters: 1, working power: AC220 (-10% ~ +5%) V, 50Hz; 2, temperature measurement: range: room temperature ~ 400 ° C; temperature display unit: 0.1 ° C; 3, repeatability: ≤ 8 ° C (flash point); 4, reproducibility: ≤ 17 ° C (flash point); 5, heating rate: in line with GB/T3536 standard; 6. Ignition mode: gas flame 3.2mm ~ 4.8mm; (ignited by gas ignition); 7, ambient temperature: (10 ~ 40) ° C; 8. Relative humidity: ≤80%; 9. Power consumption of the whole machine: no more than 400W. 10, Dimensions: (when the lifting arm is not raised) 410mm × 360mm × 310mm (length × width × height); (When the lift arm is raised) 410mm × 360mm × 420mm (length × width × height)
Introduction: HSY-3536A automatic open flash point automatic tester (touch screen) is designed and manufactured according to the requirements of the People's Republic of China standard GB/T 3536-2008 "California open cup method for the determination of flash point and ignition point of petroleum products". The method specified in this standard measures the flash point of petroleum products other than fuel oil that have an open cup flash point above 79 °C. This instrument is an automatic open flash point tester. It is an ideal substitute for similar imported instruments and can be widely used in railway, aviation, electric power, petroleum industry and scientific research departments.
