HSY-2801E1 penetration tester Introduction: The HSY-2801E1 penetration tester is designed according to the requirements of T 0604-2011 "Asphalt Penetration Test" in JTG E20-2011 "Testing Procedures for Asphalt and Asphalt Mixtures for Highway Engineering" of the People's Republic of China. made. It is suitable for testing the penetration of petroleum asphalt, modified asphalt and liquid petroleum asphalt or emulsified asphalt after evaporation. The instrument can also be used for solid fine particles, powders, colloids, frozen bodies and other materials, as well as cheese, sugar gum, butter, wheat cream, butter, fermented body and other food materials inspection, in the food industry, traffic road engineering and other industries The department can be widely used. Features: 1. The design of the lifting mechanism is novel, coarse adjustment and fine adjustment, and the upper and lower adjustment is easy. 2, using a novel heating structure design, heating, temperature measuring device can be separated from the thermostatic bathtub, easy to operate. 3. It is equipped with automatic temperature controller and high-precision temperature sensor. The temperature setting is convenient and the temperature control precision is high. 4. Using a novel digital meter, the data is stable, the work is reliable, and the measurement results are accurate. Technical Parameters: Measuring range: (0 ~ 600) penetration; Resolution 0.01mm; Needle control: You can select 5 seconds or 60 seconds respectively, and the time error is less than ±0.1 seconds. Heater power: 200W; Temperature control accuracy: 25 °C ± 0.1 °C (Note: the ambient temperature should not be higher than 20 ° C); Temperature control mode: high precision digital temperature controller; Thermostatic bath: a hard glass cylinder; Stirring: magnetic stirring beads are automatically stirred; Standard needle: 2.5g ± 0.05g, T 0604-2011 standard requirements; Bracket lifting frame: coarse adjustment and fine adjustment double lifting adjustment mechanism, which is convenient for the needle tip to align with the sample plane; Working power supply: AC (220 ± 10%) V, 50Hz; Dimensions: 280mm × 350mm × 700mm (length × width × height).
Introduction: The HSY-2801E1 penetration tester is designed according to the requirements of T 0604-2011 "Asphalt Penetration Test" in JTG E20-2011 "Testing Procedures for Asphalt and Asphalt Mixtures for Highway Engineering" of the People's Republic of China. made. It is suitable for testing the penetration of petroleum asphalt, modified asphalt and liquid petroleum asphalt or emulsified asphalt after evaporation. The instrument can also be used for solid fine particles, powders, colloids, frozen bodies and other materials, as well as cheese, sugar gum, butter, wheat cream, butter, fermented body and other food materials inspection, in the food industry, traffic road engineering and other industries The department can be widely used.
