HSY-261A automatic closed flash point tester (touch screen) Introduction: HSY-261A automatic closed flash point tester (touch screen) is designed and manufactured according to the requirements of the People's Republic of China standard GB/T261-2008 "Determining the Binsky-Martin Closed Cup Method of Flash Point", which is applicable to the standard. The specified method for the determination of flammable liquids, liquids with suspended particles, flashes of liquids and other liquids that tend to form on the surface under test conditions, and is widely used in the petroleum industry and in railways, aviation, electric power, related universities and research institutes. Departments. This instrument is suitable for samples with a closed flash point above 40 °C. Features: 1. Adopt color LCD screen display, touch screen keyboard, full Chinese man-machine dialogue interface, parameters such as expected flash point, sample label, atmospheric pressure, test date and so on. 2, with a prompt menu and guided input work mode. 3. The analog tracking shows the function curve of temperature rise and test time. It has a small operation interface and a Chinese error operation software prompt function. The test date and test time parameters can be modified. 4, can store 10 screens, 120 sets of historical data. 5. Automatically prompt the influence of atmospheric pressure on the test and calculate the correction value. 6, differential detection, system deviation automatically corrected. 7. The opening, ignition, detection and printing data are automatically completed, and the test arm automatically rises and falls when the test starts and ends. Technical Parameters: 1, working power: AC (220 ± 5%) V, 50Hz. 2, temperature measurement: range: room temperature ~ 300 ° C, temperature display unit: 0.1 ° C. 3. Repeatability: It meets the requirements of GB/T261-2008 standard. 4. Reproducibility: It meets the requirements of GB/T261-2008 standard. 5, the sample heating rate: A step: (5 ~ 6) ° C / min; Step B: (1 to 1.5) ° C / min; 6, stirring speed: (1) (90 ~ 120) rev / min, suitable for the test steps (2) (250 ± 10) rpm, applicable to test step B. 7. Ignition mode: Gas flame (igniting the ignition nozzle with an igniter, the flame length is 3-4mm). 8, ambient temperature: (10 ~ 40) ° C; relative humidity: ≤ 80%. 9. Power consumption of the whole machine: no more than 500W. 10, Dimensions: (when the lifting arm is not raised) 410mm × 360mm × 310mm (length × width × height); (When the lift arm is raised) 410mm × 360mm × 420mm (length × width × height)
Introduction: HSY-261A automatic closed flash point tester (touch screen) is designed and manufactured according to the requirements of the People's Republic of China standard GB/T261-2008 "Determining the Binsky-Martin Closed Cup Method of Flash Point", which is applicable to the standard. The specified method for the determination of flammable liquids, liquids with suspended particles, flashes of liquids and other liquids that tend to form on the surface under test conditions, and is widely used in the petroleum industry and in railways, aviation, electric power, related universities and research institutes. Departments. This instrument is suitable for samples with a closed flash point above 40 °C.
