The main parameters: 1, the device by the control box, burning, burning lamp, solenoid valve, high voltage ignition, test fixture, gas pipe and signal line; 2, burning time: 0 ~ 99.99 / S/M/H. 3, combustion box: A, made by stainless steel box, 385 mm long, depth 204 mm, height 360 mm; B, burning the bottom of a 10 hole diameter of 19 mm, there are 13 mm wide near the walls near the top of ventilation slots. C, the whole combustion box by four high 10 mm supporting feet. D, has placed a thermometer in combustion box at the top of the hole, the hole in the top central part between the center 20 mm from the inside rear panel. 4, the gas nozzle diameter is 9.5 m 5, nozzle mouth center in sample free end under 19 mm; 6, the length of the metal comb for at least 110 mm, 7 ~ 8 times every 25 mm smooth crenate; 7 and 1 mm steel ruler precision; 8, power supply: 220 v / 50 hz 9, air supply: the gas or liquefied petroleum gas 10, fume hood: combustion box should be in the fume hood, fume hood internal capacity for combustion volume of 20 ~ 110 times, and the fume hood length, width and height of any size must not exceed 2.5 times of the other two dimensions of any size. (the instrument is not configured, the customer should bring along their own)
The main parameters: 1, the device by the control box, burning, burning lamp, solenoid valve, high voltage ignition, test fixture, gas pipe and signal line; 2, burning time: 0 ~ 99.99 / S/M/H. 3, combustion box: A, made by stainless steel box, 385 mm long, depth 204 mm, height 360 mm; B, burning the bottom of a 10 hole diameter of 19 mm, there are 13 mm wide near the walls near the top of ventilation slots.