HPFE High-Throughput Pressurized Fluid Extractor Introduction
The extraction of chemicals such as PAHs, PCBs from complex matrix is difficult. By providing high pressure and high temperature environment, the HPFE 06 breaks the solid absorption or combination between target compound and samples, making the extraction operation fast and easy. The practical 6 channels parallel extraction and creative one-stop collection solution provide you with a unrivaled operation experience.
Application Area
Environmental Analysis: sVOC in Soil / Pesticide
Food: Pesticides / Veterinary Drugs / Food Additives
Agriculture: Oil / Feed / Pesticides
Others: Chemical / Academia Features
Wide Application
4 kinds of solvents optional, mixing in required portion
Accommodate 11mL to 66mL extract cell, satisfy different needs
One stop collection, accommodate 60mL to240mL collection tube which can be directly use in Raykol’s high throughput evaporation system
Wide application, apply to semi-solid and solid sample
Easy to Use Software
Easy to understand command
One key methods, easy to operate
Inner set 10-inch touch screen
Safe Protection
Over pressure or over heating alarm
Compact system with closed chamber and exhausting fan
Recording log monitoring with error reminding Technical Parameters
Instrument size: length 720, width 560, height 790
Extraction cell volume: 11,22,33,66,80,120
Temperature range: room temperature ~ 200 ℃
Extraction time: 15min
Pressure range: normal pressure ~ 20MPa
Instrument type: solid-liquid extraction
The extraction of organics in complex samples is often a weak link in modern sample preparation. The analytes such as PAHs and PCBs are prone to strong adsorption with sample particles, resulting in the failure of conventional laboratory extraction methods. The classic extraction methods in the laboratory, such as Soxhlet extraction, have large solvent consumption and long extraction time, and are often criticized by experimenters for their low efficiency.
Based on this, Ruike HPFE high-throughput pressurized fluid extraction instrument uses a high-pressure physical environment to increase the boiling point of the solvent. Under high temperature environment, the diffusivity and solubility of the target compounds have been greatly improved, so that the extraction time is reduced from a dozen hours of Soxhlet extraction to 15-30 minutes, and the solvent consumption is reduced from the original 200mL to 20 ~ 50 mL can greatly improve the extraction efficiency and reduce the extraction cost.
