HPC506 high-precision exhaust analyzer Features: 1. Large screen LCD display, Chinese (or English) menu; 2. Adopting infrared detectors, O2 and NOX sensors imported from Germany, which are not afraid of vibration, have good stability, and high accuracy; 3. Used for measuring CO, HC, CO2, O2, NOX concentrations and λ Value, COcor, speed, oil temperature, flow rate, pressure; 4. It has single idle, dual idle, and universal measurement functions; 5. Vehicles that use gasoline, LPG, CNG, alcohol, and diesel as fuel can be measured; 6. Meet the new national standard GB18285-2018 and the US BAR-97 standard, and comply with ISO3930 or OIMLR99 level 00 accuracy 7. Equipped with automatic zero adjustment, automatic cleaning, automatic temperature compensation, and pressure compensation; 8. Equipped with HC residual measurement, flow monitoring, and gas path leakage inspection; 9. There is a self-diagnosis function inside the machine, and there will be a prompt when there is a fault. Measurement can only continue until the fault is resolved; 10. Equipped with speed and oil temperature measurement, built-in printer or Bluetooth, RS232 interface; 11. License plate number input and 500 sets of data storage, backup function, clock display; Technical parameters: Measurement range: HC: 0-10000 × 10-6 (ppm) vol CO: 0-10 × 10-2 (%) vol CO2: 0-20 × 10-2 (%) vol O2: 0-25 × 10-2 (%) vol NOx: 0-5000 × 10-6 (ppm) Vol λ: 0.50-3.00 COcor: 0-10 × 10-2 (%) vol Speed: 0-9990rpm Oil temperature: 0-150 ℃ Repeatability Repeatability error ≤ ± 2% Stability automatic zero calibration, moment drift ≤ ± 3% Resolution HC: 1 × 10-6 (ppm) vol CO: 0.01 × 10-2 (%) vol CO2: 0.1 × 10-2 (%) vol O2: 0.01 × 10-2 (%) vol NOx: 1 × 10-6 (ppm) vol λ: zero point zero one RPM is 10rpm, OIL TEMP is 0.1 ℃ 95% response time, no more than 10 seconds response time Preheating time of 3 minutes (can be preheated for 1 minute for emergency detection) The output mode can be displayed on the screen, and can print the maximum, average, minimum values of gas concentration, as well as the license plate number and testing Time, date, speed, oil temperature λ、 COcor value, can be attached to an interface and connected to a computer network Environmental conditions Temperature -5~50 ℃, relative humidity ≤ 90% Power supply AC100-240V 50/60Hz or DC12V (optional power inverter) consumes 40VA of power Overall dimension 420mm (length) × 310mm (width) × 170mm high Weight approximately 10kg
Features: 1. Large screen LCD display, Chinese (or English) menu; 2. Adopting infrared detectors, O2 and NOX sensors imported from Germany, which are not afraid of vibration, have good stability, and high accuracy; 3. Used for measuring CO, HC, CO2, O2, NOX concentrations and λ Value, COcor, speed, oil temperature, flow rate, pressure; 4. It has single idle, dual idle, and universal measurement functions; 5. Vehicles that use gasoline, LPG, CNG, alcohol, and diesel as fuel can be measured; 6. Meet the new national standard GB18285-2018 and the US BAR-97 standard, and comply with ISO3930 or OIMLR99 level 00 accuracy 7. Equipped with automatic zero adjustment, automatic cleaning, automatic temperature compensation, and pressure compensation; 8. Equipped with HC residual measurement, flow monitoring, and gas path leakage inspection; 9. There is a self-diagnosis function inside the machine, and there will be a prompt when there is a fault. Measurement can only continue until the fault is resolved; 10. Equipped with speed and oil temperature measurement, built-in printer or Bluetooth, RS232 interface; 11. License plate number input and 500 sets of data storage, backup function, clock display;
