HPC302 Automotive Exhaust Analyzer Features: 1. Used to measure the concentration of HC, CO, and NOx gases in automotive exhaust emissions, assembled using foreign technology and imported key components. 2. It has a high brightness digital display, automatic zero calibration, automatic data linearization processing, automatic alarm when the air circuit is blocked, and automatic diagnosis of the unit in case of faults, 3. The date and time function for printing testing is equipped with a built-in printer (or Bluetooth, RS232, analog interface), which can measure free and dual idle speeds. It has the characteristics of easy operation, accurate measurement data, and stable and reliable operation. Technical parameters: Measurement range: HC: 0-10000 × 10-6 (ppm) vol CO: 0-10 × 10-2 (%) vol NOx: 0-4000 × 10-6 (ppm) vol Indication error: HC ± 12 × 10-6 (ppm) vol (absolute error) or ± 5% (relative error) CO ± 0.06 × 10-2 (%) vol (absolute error) or ± 5% (relative error) NOx ± 25 × 10-6 (ppm) vol (absolute error) or ± 4% (relative error) Repeatability: Repeatability error ≤ ± 2% Resolution: HC: 1 × 10-6 (ppm) vol CO: 0.01 × 10-2 (%) vol NOx: 1 × 10-6 (ppm) vol Stability: automatic zero calibration, moment drift ≤ ± 3% Preheating time: 8 minutes (capable of preheating for 3 minutes for emergency detection) Response time: 95% Response time not greater than 10 seconds Output method: Digital direct reading display, can be attached with a printer to print the gas name, maximum concentration, and measurement Test time, date, etc. Attachable interface and computer networking Environmental conditions: temperature -5~50 ℃, relative humidity ≤ 90% Power supply: AC100-240V 50/60Hz or DC12V (optional power inverter) Consumption power: 40VA Overall dimension: 420mm (length) × 310mm (width) × 170mm high Weight: approximately 9KG
Features: 1. Used to measure the concentration of HC, CO, and NOx gases in automotive exhaust emissions, assembled using foreign technology and imported key components. 2. It has a high brightness digital display, automatic zero calibration, automatic data linearization processing, automatic alarm when the air circuit is blocked, and automatic diagnosis of the unit in case of faults, 3. The date and time function for printing testing is equipped with a built-in printer (or Bluetooth, RS232, analog interface), which can measure free and dual idle speeds. It has the characteristics of easy operation, accurate measurement data, and stable and reliable operation.
