HPC211 Motorcycle Smoke Meter Features: 1. Split structure design, easy to operate, developed according to the technical requirements of the new national standard GBl9758-2005; 2. Adopting built-in full flow sampling technology, specifically measuring the smoke level of motorcycles during rapid acceleration and idle conditions; 3. High brightness digital display, assembled from imported key components; 4. Adopting a full flow high-temperature resistant special sampling probe, the sampling is stable, accurate, and convenient; 5. Start up and preheat for 10 minutes, and automatically adjust to zero; 6. The data is automatically linearized and can display the opacity N and light absorption coefficient K; 7. Automatically display fault codes when faults occur; 8. Equipped with automatic clock display, built-in printer or Bluetooth, RS232 interface for selection. Technical parameters: Measurement range: opacity N: 0~100% Light absorption coefficient: K: 0-90.65m-1 Indication error: ≤ ± 2% Stability: Automatic zero calibration, torque drift ≤ ± 1%/4h Resolution: 0.1% Response time: 1S ± 0.1S Output method: LED (4-bit) display, can be attached to a printer, printing out 5 sets of maximum and average values of rapid acceleration smoke intensity, idle smoke intensity, light absorption coefficient, testing time, date, etc., can be attached to an interface and connected to the computer network Environmental conditions: temperature 0-40 ℃, relative humidity ≤ 90% Power supply: AC100-240V 50/60Hz, power consumption 150VA External dimensions: Control unit: 250mm (length) × 310mm (width) × 170mm (height) Measurement unit: 350mm (length) × 260mm (width) × 170mm (height) Weight: Control unit: 4kg, measurement unit: 5kg
Features: 1. Split structure design, easy to operate, developed according to the technical requirements of the new national standard GBl9758-2005; 2. Adopting built-in full flow sampling technology, specifically measuring the smoke level of motorcycles during rapid acceleration and idle conditions; 3. High brightness digital display, assembled from imported key components; 4. Adopting a full flow high-temperature resistant special sampling probe, the sampling is stable, accurate, and convenient; 5. Start up and preheat for 10 minutes, and automatically adjust to zero; 6. The data is automatically linearized and can display the opacity N and light absorption coefficient K; 7. Automatically display fault codes when faults occur; 8. Equipped with automatic clock display, built-in printer or Bluetooth, RS232 interface for selection.
