HPC201 Automotive Exhaust Analyzer Features:
1. Used to measure the concentration of HC and CO gases in automotive exhaust emissions, assembled using foreign technology and imported key components.
2. It has a high brightness digital display, automatic zero calibration, automatic data linearization processing, automatic alarm when the air circuit is blocked, automatic diagnosis of the unit in case of failure, printing of the test date and time function, equipped with a built-in printer (or Bluetooth, RS232, analog interface), 3. It can measure free idle speed and dual idle speed,
4. It has the characteristics of easy operation, accurate measurement data, and stable and reliable operation.
Technical parameters:
Measurement range: HC: 0-10000 × 10-6 (ppm) vol CO: 0-10 × 10-2 (%) vol
Indication error: HC ± 12 × 10-6 (ppm) vol (absolute error) or ± 5% (relative error)
CO ± 0.06 × 10-2 (%) vol (absolute error) or ± 5% (relative error)
Stability: automatic zero calibration, moment drift ≤ ± 3%
Repeatability: Repeatability error ≤ ± 2%
Resolution: HC: 1 × 10-6 (ppm) vol CO: 0.01 × 10-2 (%) vol
Response time: 95% Response time not greater than 10 seconds
Preheating time: 8 minutes (capable of preheating for 3 minutes for emergency detection)
Output method: Digital direct reading display, can be attached with a printer to print the gas name, concentration maximum, average, minimum
Value, test time, date, etc. Attachable interface and computer networking
Environmental conditions: temperature -5~50 ℃, relative humidity ≤ 90%
Power supply: AC100-240V 50/60Hz or DC12V (optional power inverter) Consumption power 40VA
Overall dimension: 420mm (length) × 310mm (width) × 170mm high
Weight: approximately 9kg
Features:
1. Used to measure the concentration of HC and CO gases in automotive exhaust emissions, assembled using foreign technology and imported key components.
2. It has a high brightness digital display, automatic zero calibration, automatic data linearization processing, automatic alarm when the air circuit is blocked, automatic diagnosis of the unit in case of failure, printing of the test date and time function, equipped with a built-in printer (or Bluetooth, RS232, analog interface), 3. It can measure free idle speed and dual idle speed,
4. It has the characteristics of easy operation, accurate measurement data, and stable and reliable operation.
