HP-D1 full-automatic torsion tester Introduction: Our company is highly focused on the innovation and development of packaging testing equipment to provide customers with more accurate and convenient testing equipment. To this end, we have developed a fully automatic torque tester HP-D1, which is an advanced equipment for fully automatic testing. It has a fully automatic clamping, opening and locking integrated system design; The double selection mode of locking force and opening force can automatically test the two-way torsion value of the bottle cap; Original imported pneumatic control system with high test accuracy; Intelligent design such as overload protection, automatic reset and fault prompt ensures safe operation; And software system with easy operation of audit trail. Guangzhou Standard International has 20 years of equipment manufacturing experience in the packaging inspection equipment industry. Based on the requirements of ASTM and GB standards and market demand, our R&D team uses HP-D1 to detect whether the packaging container has been reliably sealed (secondary contamination of microorganisms, air leakage, etc.), replacing the error caused by manual rotation of the bottle cap to open or lock the bottle cap. It is a full-automatic bottle cap torque instrument. Full-automatic torsion tester HP-D1 is suitable for detecting the torque value of the locking, opening and tightening of the caps of packaging products such as bottles, beverage bottles, mineral water bottles, milk bottles, etc. It is an ideal instrument for offline or online testing of manufacturers in the packaging industry. Technical parameters: Sensor specification: 10 N • m (standard) 20 N • m, 40 N • m (optional) Torque accuracy: indication value ± 0.5% (10% - 100% of sensor specification) ± 0.05% FS (0% - 10% of sensor specification) Torque resolution: 0.0001 N • m Automatic rotation speed: 10 r/min (speed adjustable) Clamping force: the clamping force can be freely adjusted according to the material characteristics Bottle diameter: Ф 5 mm~ Ф 200 mm (other sizes can be customized as standard Bottle height: 20 mm~410 mm Cap diameter: Φ 5 mm～ Φ 84 mm Measurement unit: mN • m, N • cm, N • m, kgf • cm, kgf • cm, ozf • in, lbf • in, lbf • ft Sample clamping rotation: pneumatic Air supply pressure: 0.7 MPa (101.5 psi) Statistical quantity: 0~10 pieces (single machine) Overall dimension: 582 mm (L) × 360 mm(W) × 1036 mm(H) Power supply: 220 V 50 Hz Net weight: 33 kg
Introduction: Our company is highly focused on the innovation and development of packaging testing equipment to provide customers with more accurate and convenient testing equipment. To this end, we have developed a fully automatic torque tester HP-D1, which is an advanced equipment for fully automatic testing. It has a fully automatic clamping, opening and locking integrated system design; The double selection mode of locking force and opening force can automatically test the two-way torsion value of the bottle cap; Original imported pneumatic control system with high test accuracy; Intelligent design such as overload protection, automatic reset and fault prompt ensures safe operation; And software system with easy operation of audit trail. Guangzhou Standard International has 20 years of equipment manufacturing experience in the packaging inspection equipment industry. Based on the requirements of ASTM and GB standards and market demand, our R&D team uses HP-D1 to detect whether the packaging container has been reliably sealed (secondary contamination of microorganisms, air leakage, etc.), replacing the error caused by manual rotation of the bottle cap to open or lock the bottle cap. It is a full-automatic bottle cap torque instrument. Full-automatic torsion tester HP-D1 is suitable for detecting the torque value of the locking, opening and tightening of the caps of packaging products such as bottles, beverage bottles, mineral water bottles, milk bottles, etc. It is an ideal instrument for offline or online testing of manufacturers in the packaging industry.
