HM-DX Biotoxicity Analyzer Introduction: The HM-DX water quality biotoxicity analyzer is a new generation of biological acute toxicity analyzer used in the laboratory. It is a toxicity detection system based on biological fluorescence sensing technology, which qualitatively and quantitatively detects the changes in luminescence intensity of luminescent bacteria during metabolism. Compared with traditional biological detection methods such as fish, fleas, and other aquatic organisms, the luminescent bacteria method is simple, fast, sensitive, adaptable, has good repeatability, high accuracy, low cost, and has a wide range of applications. It is a rapid water toxicity detection instrument designed for environmental pollution, emergency accidents, security checks, and routine testing purposes, and can be used for the overall toxicity detection of heavy metals, toxins, neurotoxins, pesticide formulations, and other substances in on-site water. Complies with the national standard "GB/T15441-1995 Determination of acute toxicity of water quality - Luminescent bacteria method" and international standard (ISO 11348-3). Features: 1. Complies with national standards (GB/T15441 1995) and international standards (ISO 11348-3); 2. Biological early warning systems sensitive to over 3000 toxic compounds; 3. Obtain results within 15 minutes after sample preparation, which are fast, reliable, and reproducible; 4. The test results are highly correlated with other traditional toxicity analysis methods and can be applied to emergency water pollution detection, helping users monitor in real-time whether drainage complies with local regulations and emission standards; 5. Using silicon photomultiplier tubes to significantly improve detection sensitivity; 6. Equipped with an independently developed biological toxicity darkroom automatic lifting detection device, it solves the problem of being affected by strong light in the industry's lid opening testing; 7. Portable PVC engineering box design, can also be carried out for on-site testing; 8. A 7-inch large display touch screen eliminates the need for cumbersome button operations, making it more convenient; 9. Android intelligent operating system, more intelligent and user-friendly; 10. Equipped with RJ45 network cable interface, WIFI, 4G networking, and Bluetooth transmission function, it can achieve wireless transmission to relevant monitoring and regulatory platforms, achieve real-time data, and better meet the scene requirements of regulatory authorities; 11. The instrument is equipped with a built-in 6000mAH lithium battery pack, which can support continuous operation for more than 8 hours in the event of external power failure or no power supply; 12. A curve can create 20 concentration points, and you can freely choose whether the curve points participate in the calculation of the entire curve without the need for manual recording, ensuring more accurate curve values; (The curve concentration point can be customized and increased) Technical parameters: Detection method: Luminescent bacteria method Detector: Silicon photomultiplier tube Spectral range: 300-1100nm Strain: A strain that meets the requirements of ISO11348&GB/T 15441-1995 standards, including Vibrio fischeri and Luminescent Bacillus T3 subspecies Method standard: GB/T 15441-1995&ISO 11348 Accuracy: Sample repeated 3 times, relative deviation less than 6% Sensitivity: Equivalent to or better than the acute biological toxicity test method for fish cultured for 96 hours; Test time: Obtain results within 15 minutes after sample preparation Display result: Toxicity prompt (low toxicity, toxic, highly toxic, highly toxic) displayed according to standard requirements with detection value (mg/L) Print settings: sample name, testing personnel, testing location, reference toxin Operating environment: storage temperature -10~50 ℃, working temperature+5~45 ℃ Relative humidity: 30-95% (25 ° C) Data storage: Over 80000 entries Communication: RJ45, WIFI, 4G, USB, Bluetooth Battery: 6000mAh lithium battery Continuous working hours: more than 8 hours Power supply: 220V/12V AC/DC dual-purpose Size and weight: 420 * 330 * 175mm 5Kg
Introduction: The HM-DX water quality biotoxicity analyzer is a new generation of biological acute toxicity analyzer used in the laboratory. It is a toxicity detection system based on biological fluorescence sensing technology, which qualitatively and quantitatively detects the changes in luminescence intensity of luminescent bacteria during metabolism. Compared with traditional biological detection methods such as fish, fleas, and other aquatic organisms, the luminescent bacteria method is simple, fast, sensitive, adaptable, has good repeatability, high accuracy, low cost, and has a wide range of applications. It is a rapid water toxicity detection instrument designed for environmental pollution, emergency accidents, security checks, and routine testing purposes, and can be used for the overall toxicity detection of heavy metals, toxins, neurotoxins, pesticide formulations, and other substances in on-site water. Complies with the national standard "GB/T15441-1995 Determination of acute toxicity of water quality - Luminescent bacteria method" and international standard (ISO 11348-3).
