HKSC-2000Q automatic moisture analyzer Introduction: The automatic moisture analyzer is an intelligent instrument for measuring the total moisture and analyzing water in coal. It strictly follows the relevant requirements of the national standard to automatically complete the measurement process of total moisture and analyzing water. It can also be used to determine the moisture content of other non-metallic substances. characteristic: 1. Adopting a new control circuit with high integration, the instrument is highly intelligent, automated, and has more stable and reliable performance. 2. Adopting a large screen LCD display. Measurement data, status indication, Chinese menu operation prompts, automatic printing, clear and intuitive. 3. Adopting original imported electronic balance, weighing is stable, fast, and reliable. When there is an error in weighing, it will be automatically re weighed, and the instrument will automatically determine whether there is a container and whether there is a sample. 4. Built in fast and constant weight measurement programs, with three drying methods: light wave, infrared, and combination. Automatically print measurement data. Technical parameters: Microwave input power: ≤ 1400W Infrared power: ≤ 1200W Balance resolution: 0.001g/0.0001g Microwave frequency: 2450MHz, Microwave output power: ≤ 900W. Moisture determination accuracy: ≤ 0.4% Sample quantity: ≤ 9 pieces Working power supply: AC220V ± 22V, 50HZ ± 1HZ. Dimensions (mm): 510 × 380 × 540 Test time: 10-20 minutes Weighing range of balance: ≤ 310g Balance resolution: Total water: 0.001g Analysis water: 0.0001g Moisture determination accuracy: Total water ≤ 0.4% Analysis water: ≤ 0.2% Dimensions: 510mm × 380mm × 540mm Environmental requirements: Temperature: 0 ℃ -40 ℃ Relative humidity: ≤ 85% Sample requirements: Total water particle size<6mm, mass 8g-14g, analyzed water particle size ≤ 0.2mm, mass 0.8-1.2g
Introduction: The automatic moisture analyzer is an intelligent instrument for measuring the total moisture and analyzing water in coal. It strictly follows the relevant requirements of the national standard to automatically complete the measurement process of total moisture and analyzing water. It can also be used to determine the moisture content of other non-metallic substances.
