Introduction: The HKKH3000 fast ashing furnace is a high-temperature resistance furnace designed for rapid ashing of coal, coke and petroleum. It can be used for the measurement of painting and ash for experiments in power, coal, chemical, metallurgical, scientific research institutes and universities. This product is applying for a national patent. HKKH3000 adopts special microcomputer chip for temperature control, digital display, digital PID adjustment, convenient operation and accurate temperature control. The heating rate is as fast as 30min and rises to 850°C. The ash experiment is short: even the heating zone is tested for 45min. After all the tests are finished, the traditional heating temperature is 90min and the test is 40min. The oxygen supply system is provided to make the ashing more complete and faster. It adopts high-quality imported vacuum fiber furnace, furnace wire, good heat preservation effect, fast heating rate, remarkable energy saving and energy saving, and adopts literacy electronic timer timing. The timing length can be set arbitrarily from 1 to 9999 minutes. Technical Parameters: Power supply voltage: 220V 50HZ Power: 4KW Rated operating temperature: 900 ° C Zui high temperature: 1000 Thermocouple graduation number: K Temperature resolution: 1K Control method: PID adjustment Time resolution: 1min Heating rate: continuously adjustable, Zui is not less than 100 °C / min Studio size: 300*200*120mm
Introduction: The HKKH3000 fast ashing furnace is a high-temperature resistance furnace designed for rapid ashing of coal, coke and petroleum. It can be used for the measurement of painting and ash for experiments in power, coal, chemical, metallurgical, scientific research institutes and universities. This product is applying for a national patent. HKKH3000 adopts special microcomputer chip for temperature control, digital display, digital PID adjustment, convenient operation and accurate temperature control. The heating rate is as fast as 30min and rises to 850°C. The ash experiment is short: even the heating zone is tested for 45min. After all the tests are finished, the traditional heating temperature is 90min and the test is 40min. The oxygen supply system is provided to make the ashing more complete and faster. It adopts high-quality imported vacuum fiber furnace, furnace wire, good heat preservation effect, fast heating rate, remarkable energy saving and energy saving, and adopts literacy electronic timer timing. The timing length can be set arbitrarily from 1 to 9999 minutes.
