Introduction: The HK-6010 Flue Gas Emission Reduction Online Monitoring System is a new type of equipment independently developed by Beijing Huake Instrument Technology Co., Ltd. It can measure the pH of the desulfurization lye in real time and upload the measurement data to the EPA through the GPRS/3G public network. The server enables the on-site user to find out whether the pH value of the desulfurization alkaline solution is up to standard. At the same time, the EPA can monitor the pH value of the desulfurization alkali solution of each boiler flue gas treatment system in real time and effectively monitor the operation condition of the desulfurization and dust removal device, thus To achieve the purpose of supervision, and the investment operation cost is very low, very easy to promote the use. Has been successfully used for boiler emission reduction system operation monitoring (EPB monitoring, pollution control enterprise self-monitoring, etc.). The wet desulfurization of coal-fired boiler waste gas is a commonly used exhaust gas emission reduction technology for small and medium-sized coal-fired boilers. The principle is that the sulfur dioxide in the exhaust gas of coal-fired boilers reacts with alkaline circulating water (hereinafter referred to as lye) and neutralizes the reaction to achieve desulfurization. And the purpose of denitrification, while the alkaline solution can also remove the smoke, so that the flue gas purification, can reduce the coal-fired boiler pollutant emissions of more than 90%. In order to ensure stable absorption of sulfur dioxide by the alkali solution, alkali should be added in time to ensure that the pH of the alkali solution is ≥9. Features: 1. Through the GPRS/3G public network, the monitoring data is uploaded to the environmental monitoring department's server, so that the environmental protection supervisors can monitor the operation status of the pollutant emission reduction of coal-fired boilers in their jurisdictions without leaving the household, reduce the workload of the inspection personnel, and increase efficiency; 2. pH measurement sensor automatic cleaning system, free of manual maintenance; 3. All-weather real-time monitoring of field instrument measurement values and operating curves; 4. Determine the operating reliability of the emission reduction system through the historical monitoring curve. Technical Parameters: Measurement range: pH: (2.00 to 11.00) pH Temperature: (0.00~99.9)°C ATC: (0.1~60)°C Minimum resolution: pH: 0.01 pH Voltage: 0.1mV Temperature: 0.1°C Instrument indicates value error: pH: 0.1 pH Temperature: 0.5°C Isolated current output: (0~10)mA, (0~20)mA, (4~20)mA Output current error: ±1%FS Sample Condition: General Industrial Sewage Sample temperature: (5.0~50.0)°C Sample pressure: <0.6MPa Ambient temperature: (5~50)°C Environmental Humidity: ≤95%RH Dimensions (meter box): 300mm x 400mm x 200mm (width x height x depth) Power supply: AC (100~240)V, frequency (50~60)Hz Power: ≤40W Insulation strength: 1500VAC power to ground, no arcing within 1min
Introduction: The HK-6010 Flue Gas Emission Reduction Online Monitoring System is a new type of equipment independently developed by Beijing Huake Instrument Technology Co., Ltd. It can measure the pH of the desulfurization lye in real time and upload the measurement data to the EPA through the GPRS/3G public network. The server enables the on-site user to find out whether the pH value of the desulfurization alkaline solution is up to standard. At the same time, the EPA can monitor the pH value of the desulfurization alkali solution of each boiler flue gas treatment system in real time and effectively monitor the operation condition of the desulfurization and dust removal device, thus To achieve the purpose of supervision, and the investment operation cost is very low, very easy to promote the use. Has been successfully used for boiler emission reduction system operation monitoring (EPB monitoring, pollution control enterprise self-monitoring, etc.). The wet desulfurization of coal-fired boiler waste gas is a commonly used exhaust gas emission reduction technology for small and medium-sized coal-fired boilers. The principle is that the sulfur dioxide in the exhaust gas of coal-fired boilers reacts with alkaline circulating water (hereinafter referred to as lye) and neutralizes the reaction to achieve desulfurization. And the purpose of denitrification, while the alkaline solution can also remove the smoke, so that the flue gas purification, can reduce the coal-fired boiler pollutant emissions of more than 90%. In order to ensure stable absorption of sulfur dioxide by the alkali solution, alkali should be added in time to ensure that the pH of the alkali solution is ≥9.
