HK-338 Conductivity Meter Brief introduction
SCM control system , a high degree of intelligence , accurate measurement , easy to operate . Used for
continuousmonitoring of the strength of the aqueous solution conductive capacity , and thus indirectly to
determine how much of the content of ions in solution , the water quality , widely used in electric power ,
petroleum , chemical , paper and other industries . Features
1. Advanced embedded LAN technology
2. 192 * 64 dot matrix LCD, Chinese and English display simultaneously
3. Unique four wire measurement techniques, can ignore cable length's influence on the measurement
4. According to the graph can be intuitive conductivity change trend
5. All operating and programming are done by 8 touch membrane keyboards
6. Programming function of the instrument have a 4 digit security code protection, cannot be
easily changed
7. The CAN communication interface, CAN be directly with the data acquisition system connected
to the Internet
8. 2 isolated current output and two alarm relay outputs
9. Running record function, can easily most of queries for instrument operation Technical indicators
1. Show: 192 * 64 dot matrix LCD, can choose to display in Chinese or English
2. The temperature measurement range: 0.0 ~ 99.9 °C
3. The scope of the ATC: (0.1 ~ 60.0 °C)
4. The minimum resolution: conductivity: 0.001 mu S/cm
5. Basic error: conductivity: plus or minus 1.5% F.S 6. Response time (T90) : 30 s (25 °C)
6. The response time (T90) : 30 s (25 °C)
7. The output current (0 ~ 10), mA (0 ~ 20) mA (4 ~ 20 mA) or (2 separate output, the output electrical
conductivity values or temperature)
8. Output current error, plus or minus 0.5% F.S
9. The biggest load resistance: 800 Ω
10. Alarm output: acoustic alarm relay outputs, programmable set alarm content
11. General inquiry: CAN bus (optional)
12. Sample conditions: temperature (5 °C ~ 50) flow quantity: 6 liters/hour water allows solids: 5 microns or less (there is no glue, no fat)
13. : 5 ~ 45 °C environment temperature
15. Relative humidity: 90% RH or less (no condensation)
16. Storage temperature: (~ 20 °C ~ 55)
17. Overall size: 146 mm x 146 mm x 154 mm (width * height (depth)
18. The hole size: 139 mm x 139 mm
19. Power supply: AC (85 ~ 265 V), frequency (50 ~ 60 Hz)
20. Power: 8 w
21. Insulation strength: power supply of 1500 v, no flash-over 1 minutes
22. The weight: 2 kg
Brief introduction
SCM control system , a high degree of intelligence , accurate measurement , easy to operate . Used for
continuousmonitoring of the strength of the aqueous solution conductive capacity , and thus indirectly to
determine how much of the content of ions in solution , the water quality , widely used in electric power ,
petroleum , chemical , paper and other industries .