Introduction: The HK-3011SK open flash point tester is used to examine the flammability of liquids in an open environment and meets the requirements of the People's Republic of China Standard GB/T 3536-2008 "Determination of Open Flash Point and Flash Point of Petroleum Products (Cleveland Open Cup Method)". It is suitable for petroleum products with a flash point higher than 79°C except for the fuel oil (the fuel oil usually measures the closed flash point according to GB/T261). This product consists of measuring devices (including oil cups, heaters, cooling fans, ignition wire and stirring motor and other mechanical structures) and display devices. It has a rapid response and accurate measurement. It is an ideal open flash point measurement product, widely used in railways, Aviation, electric power, oil industry and research sector. Features: 1. Adopt 7吋640×480 true color touch screen, Chinese and English display optional, with help menu, easy to operate 2. Automatic heating, ignition, detection, printing, cooling, etc. 3. Simulated trace shows the function curve of temperature rise and test time, with misoperation software prompt modification function 4. The temperature value automatically stops heating, and the air source is cut off automatically when the test ends. 5. High-precision ionization ring detection 6. Electronic ignition device adopts new silicon nitride igniter, closer to open flame, repeatable and reliable, long life 7. Gas ignition auto-ignition, no manual ignition 8. The instrument has self-test, diagnosis, fault alarm security features 9. Built-in atmospheric pressure sensor, automatic pressure correction, no artificial setting of atmospheric pressure 10. With RJ45 interface for LAN data transmission and firmware upgrade 11. With USB interface for software upgrades and data export 12. Can store 1000 test records, can be viewed according to the date of operation, print Technical Parameters: Range: room temperature ~ 400 °C Accuracy: ±2°C Repeatability: ≤4°C Resolution : 0.1°C Heating rate: in line with GB/T 3536-2008 standard Ignition method: automatic electronic ignition, automatic gas flame Cooling method: forced air cooling Total power consumption: ≤800W Operating power supply: 1)AC(170～264)V, 50/60Hz; 2)AC(120±10%)V,(60±1)Hz(select according to need when ordering) Printing function: The instrument has a built-in miniature thermal printer, which can automatically and manually print test results Storage function: 1000 test records can be stored, according to the date of operation, print Dimensions and Weight: Control Unit: L270mm×W170mm×H130mm Approx. 2.0kg Measurement section: L480mm×W245mm×H280mm about 18.0kg
Introduction: The HK-3011SK open flash point tester is used to examine the flammability of liquids in an open environment and meets the requirements of the People's Republic of China Standard GB/T 3536-2008 "Determination of Open Flash Point and Flash Point of Petroleum Products (Cleveland Open Cup Method)". It is suitable for petroleum products with a flash point higher than 79°C except for the fuel oil (the fuel oil usually measures the closed flash point according to GB/T261). This product consists of measuring devices (including oil cups, heaters, cooling fans, ignition wire and stirring motor and other mechanical structures) and display devices. It has a rapid response and accurate measurement. It is an ideal open flash point measurement product, widely used in railways, Aviation, electric power, oil industry and research sector.
