Performance characteristics: 1. Advanced process design, low power consumption, reliable performance, beautiful shape, easy to use and carry; 2. Manufactured according to the international standard iso-2954, the measuring value can be directly compared with the international vibration intensity standard (iso-2372) to determine the operation state of the equipment (good, attention, danger); 3. Parallel shear and ring shear acceleration sensors with high reliability; 4. With the function of high and low frequency grading, it is easy to identify the fault type of equipment (high frequency or low frequency fault) during vibration measurement; 5. With signal output function, special earphones are optional, and stethoscope function is also available; 6. Equipped with oscilloscope and vibration recorder, which can be used to monitor and record vibration information of equipment; 7. The connection between the vibration sensor and the host can be divided into the integral type and the split type, in which the split type is connected with the host by high-strength stretching screw cable; 8. Suitable for vibration and temperature measurement of all kinds of machinery in industrial and mining enterprises; 9. The optional software can facilitate the management of equipment status data, trend analysis and report printing. Technical indicators: Inductor: the integral type USES the annular shear type acceleration sensor, the split type USES the charge amplifier built-in parallel shear type acceleration sensor Measurement range: acceleration degree: 0.1 ~ 199.9m/s2(0 ~ p) (5Hz/10Hz ~ 1KHz);1 KHZ ~ 10 KHZ) Speed: 0.01 ~ 19.99cm/s(RMS) (5Hz/10Hz ~ 1KHz) Displacement: 0.001 ~ 1.999mm(p ~ p) (5Hz/10Hz ~ 1KHz) Frequency range: frequency lower limit: 10Hz (5Hz) Frequency upper limit: 1KHz or 10KHz is optional Measurement accuracy: 5% plus or minus 2 words S the temperature measurement range: 0 ~ 200 ℃ Measurement accuracy: 1% plus or minus 1 word Display: three - position semi-liquid crystal display Power source: 9V laminated battery 1 section, can be used continuously for 30 hours Li volume: 165 * 67 * 30(mm) Weight: 185g
Performance characteristics: 1. Advanced process design, low power consumption, reliable performance, beautiful shape, easy to use and carry; 2. Manufactured according to the international standard iso-2954, the measuring value can be directly compared with the international vibration intensity standard (iso-2372) to determine the operation state of the equipment (good, attention, danger); 3. Parallel shear and ring shear acceleration sensors with high reliability; 4. With the function of high and low frequency grading, it is easy to identify the fault type of equipment (high frequency or low frequency fault) during vibration measurement; 5. With signal output function, special earphones are optional, and stethoscope function is also available; 6. Equipped with oscilloscope and vibration recorder, which can be used to monitor and record vibration information of equipment; 7. The connection between the vibration sensor and the host can be divided into the integral type and the split type, in which the split type is connected with the host by high-strength stretching screw cable; 8. Suitable for vibration and temperature measurement of all kinds of machinery in industrial and mining enterprises; 9. The optional software can facilitate the management of equipment status data, trend analysis and report printing.
