HE-ZD-100 simulation car transport vibration table Introduction: The Howe series of analog car transport vibration tables are manufactured according to international transport standards and with reference to foreign similar equipment. The eccentric shaft is used to generate an elliptical motion trajectory in rotation to simulate the vibration and collision of goods generated during transportation of a car or a ship. The test platform is fixed on the eccentric bearing. When the eccentric bearing rotates, the entire plane of the test platform will have an elliptical up and down motion. Adjusting the eccentric shaft with the rotation speed is equivalent to adjusting the driving speed of the car or the ship. Product use: Simulated automobile transportation vibration table is suitable for simulation transportation test of toys, electronics, furniture, gifts, ceramics, packaging and other products, in line with EN, ANSI, UL, ASTM, ISTA US, European, international transportation standards. Features: 1. The price is low, the price is only 10% of the similar products in the United States. 2. Digital meter shows vibration frequency 3. Synchronous squelch belt drive with extremely low noise 4. The sample is clamped by rail type, which is easy to operate and safe. 5. The base of the machine is made of heavy-duty channel steel with vibration-damping rubber pad. It is easy to install and runs smoothly. No need to install anchor screws. 6. DC motor speed regulation, stable operation and strong load capacity 7. Rotary vibration (commonly known as horse racing), in line with European and American transportation standards Technical Parameters: Specification model: HE-ZD-100 Table size (MM): 1000*1200 Motor power: 1HP (750W) Machine weight (approx): 100KG Speed (rev / min): 100 ~ 300RPM Speed adjustment mode: DC DC speed regulation Power supply: single phase three wire 220V 50HZ Speed display accuracy: 1RPM (rev / min) Vibration mode: reciprocating (horse race, elliptical vibration) Amplitude (P-P): 25.4mm (1 inch) Unit selection: H (hours), M (minutes), S (seconds) Time setting range: Oseconds seconds ~ 99hour hours
Introduction: The Howe series of analog car transport vibration tables are manufactured according to international transport standards and with reference to foreign similar equipment. The eccentric shaft is used to generate an elliptical motion trajectory in rotation to simulate the vibration and collision of goods generated during transportation of a car or a ship. The test platform is fixed on the eccentric bearing. When the eccentric bearing rotates, the entire plane of the test platform will have an elliptical up and down motion. Adjusting the eccentric shaft with the rotation speed is equivalent to adjusting the driving speed of the car or the ship. Product use: Simulated automobile transportation vibration table is suitable for simulation transportation test of toys, electronics, furniture, gifts, ceramics, packaging and other products, in line with EN, ANSI, UL, ASTM, ISTA US, European, international transportation standards.