HE-BH-100A side pressure ring pressure strength testing machine Introduction: The HE-BH-100A side pressure ring strength tester can perform the following tests: 1. Equipped with ring pressure test center plate and special pressure sampler for ring pressure to carry out ring compression strength test (RCT); 2. Equipped with side pressure (adhesive) sample sampler and auxiliary guide block for corrugated board edge compressive strength test (ECT); 3. Equipped with a peel strength test stand for corrugated board bonding (peeling) strength test (PAT); 4. Equipped with a flat sampler for corrugated board flatness strength test (FCT); 5. Equipped with corrugometer and auxiliary equipment for laboratory flute test (CCT and CMT). Features: 1. The system automatically calculates the ring pressure strength and the edge pressure strength, without the need of user calculation, reducing the workload and error; 2. Self-packing and stacking test function, can directly set the power and time, and automatically stop after the test is completed; 3. After the test is completed, there is an automatic return function, which automatically determines the crushing force and automatically saves the test data; 4. Three configurable speeds, full Chinese LCD display operation interface, a variety of units to choose from; 5. Record and save 20 test results. Technical Parameters: Model: HE-BH-100A Measuring range: ≤200 kg Power unit: N, kN, kgf, gf, lbf Strength unit: Pa, kPa, MPa, kgf/cm2, lbf/in2 Test speed: 12.5 mm/min Indication accuracy: <±1 % Resolution: 1 N Return speed: 50.0 mm/min Platen size: Φ110 mm Upper and lower platen spacing: 60 mm Column spacing: 250mm Weight (approx.): 40 kg Standard configuration: one test fixture Optional configuration: Side pressure sampler / flat pressure sampler / ring pressure sampler
Introduction: The HE-BH-100A side pressure ring strength tester can perform the following tests: 1. Equipped with ring pressure test center plate and special pressure sampler for ring pressure to carry out ring compression strength test (RCT); 2. Equipped with side pressure (adhesive) sample sampler and auxiliary guide block for corrugated board edge compressive strength test (ECT); 3. Equipped with a peel strength test stand for corrugated board bonding (peeling) strength test (PAT); 4. Equipped with a flat sampler for corrugated board flatness strength test (FCT); 5. Equipped with corrugometer and auxiliary equipment for laboratory flute test (CCT and CMT).
