HDL-600H intelligent touch screen sulfur analyzer Introduction: This product is designed according to the Coulombic titration method in GB/T214-2007 "Method for determination of total sulfur in coal", and can automatically complete the determination of total sulfur content in strict accordance with relevant national standards. This product is widely used in various industries such as coal testing, brick factories, stone heating, electricity, coking, chemical engineering, scientific research, and food. characteristic: 1. Unmanned automatic control: As long as the operator puts several or more prepared samples into the sample arrangement device, the system will automatically push, lift, retract, lower, inject, measure, dispense, discard the sample boat and other processes one by one according to the assembly line working mode, automatically completing the sample testing. The entire experimental process no longer requires personnel intervention and attention. 2. Automatically control the start stop and mixing speed of the mixing mechanism, so that even if accidentally operated, there will be no adverse phenomenon of over electrolysis; At the same time, electronic non-contact speed regulation is adopted, and long-term use will not cause intermittent fast or slow stirring speed during the experimental process, effectively ensuring the stability and accuracy of the experimental results. 3. The automatic control of the air circuit device can effectively improve the service life and lifespan of the air pump diaphragm, avoid the use time and frequency of ineffective resources, and ensure stable working performance. 4. The end point of the experiment is automatically judged, and the double judgment of time and sulfur weight measurement is adopted, which fully ensures the full and effective decomposition of samples of unknown categories, eliminates the single mode of "stop at once when the time comes", and effectively improves the detection ability and effectiveness of products for various materials. 5. The heating of silicon carbon tubes adopts an automatic opening tracking method, which can effectively improve the service life and lifespan of silicon carbon tubes, thereby enhancing the utilization rate of resources and accessories. 6. The high-temperature electrode of the silicon carbon tube is designed with a softened alloy integrated material, ensuring that the silicon carbon tube will not experience poor contact or "sparking" after long-term use, while avoiding the probability of silicon carbon breakage or adverse electromagnetic interference caused by "sparking". 7. Adopting the principle of precision power transmission to prevent sample jamming, and adding a rigid "decoupling" protection scheme. 8. Easy to operate, no manual involvement is required after the experiment begins, and the high-temperature furnace is enclosed in the chassis, so operators do not have to worry about the harm caused by high temperature. Full Chinese prompts, user-friendly interface, easy to learn. 9. Adopting a dual independent Hall element positioning scheme, the multi-stage sample delivery is continuously adjustable and compatible with high sulfur and fast sulfur sample determination. 10. The design of the horizontal high-temperature furnace body effectively ensures the stable formation of the constant temperature zone. Technical parameters: Flow measurement range: 0.01% -60%, resolution 0.01. (Supports optional 0.001 level); Maximum number of samples for a single layout: 24, can be continuously sampled, or priority can be given to making new samples. Analysis time: Automatically determine the end point of the experiment (usually 3-4.5 minutes/sample). Heating time: 15-25 minutes from the start of ambient temperature. Temperature control: 700 ℃ -1190 ℃, target temperature can be set; Temperature control accuracy: ± 2.5 ℃. Power supply: 220V ± 20V, 50Hz. The instantaneous maximum power of the cracking furnace is ≤ 2.5 Kw. Sample quality: Supports mass input within the range of 10mg to 999.9mg. Data processing: It can be printed immediately, stored locally, and exported via USB in Excel format as a list of standard experimental results. Reminder method: Intelligent voice broadcast. Operation method: The 10.4-inch large-sized industrial touch screen allows for direct touch operation, which is convenient and direct. Accuracy: Complies with the allowable error range of the GBT214-2007 standard sample.
Introduction: This product is designed according to the Coulombic titration method in GB/T214-2007 "Method for determination of total sulfur in coal", and can automatically complete the determination of total sulfur content in strict accordance with relevant national standards. This product is widely used in various industries such as coal testing, brick factories, stone heating, electricity, coking, chemical engineering, scientific research, and food.
