Introduction: MIT folding test machine is mainly used for folding the cardboard, circuit boards (commonly known as software circuit boards) for the flexibility test; such as cell phones, PDAs, electronic dictionaries, laptops and other electronic products FPC flexible board flex resistance, resistance to inflection Life test. The test specimen will be fixed on the upper and lower fixtures, left and right repeatedly take 15mm loneliness of the test specimen about 135 degrees, until the test specimen so far. The main technical indicators and performance parameters in line with the relevant provisions of ISO5626 and GB2679 • 5 The standard is based on: APPI-T423PM, ASTM-D2176, JIS-P8115, BG / T2679.5 Folding strength test, the test will be fixed in the upper and lower clamps on the fixture, the fixture on the dragging the required load, about 15mm wide left and right sides of the test piece about 135 degrees until the test piece until the break. Technical Parameters: Sample: 15 * 150mm Load capacity: 10N (adjustable) Bending angle: 135 ° +2 Fold speed 175 + 10 times / min. The width of the folding head is 19 + 1mm, the radius of the arc of the fold is R = 0.38 + 0.02mm (R = 1.0mm 3.5mm selected) Folding the gap between the first 0.25, 0.50,0.75,1.00 mm. (Selected) Bending situation: Bending at break Counter: LCD, 0 ~ 999,999 Volume: 480 × 280 × 450mm Weight: 45kg Power: AC220V, 2.6A
Introduction: MIT folding test machine is mainly used for folding the cardboard, circuit boards (commonly known as software circuit boards) for the flexibility test; such as cell phones, PDAs, electronic dictionaries, laptops and other electronic products FPC flexible board flex resistance, resistance to inflection Life test. The test specimen will be fixed on the upper and lower fixtures, left and right repeatedly take 15mm loneliness of the test specimen about 135 degrees, until the test specimen so far. The main technical indicators and performance parameters in line with the relevant provisions of ISO5626 and GB2679 • 5 The standard is based on: APPI-T423PM, ASTM-D2176, JIS-P8115, BG / T2679.5 Folding strength test, the test will be fixed in the upper and lower clamps on the fixture, the fixture on the dragging the required load, about 15mm wide left and right sides of the test piece about 135 degrees until the test piece until the break.
