Introduction: The Auto SPE Pro Automated Solid Phase Extraction System integrates the solid-phase extraction steps into a single platform and fully automates the entire SPE extraction process (activation, sample loading, elution, drying, and elution). It greatly improves the efficiency of sample preparation and frees analysts from tedious pre-treatment work to make sample preparation faster and more efficient. Features: Number of channels and control mode: The instrument host adopts a modular design, with dual channels as separate modules, support for channel expansion, and maximum support for 12 channels; Sample pump: The use of valveless ceramic metering pump, sampling accuracy, solvent corrosion resistance, high pressure resistance, and compatible with the size of the volume loading; Pressure Sensing: built-in pressure sensor for each channel, when the pipeline blockage exceeds the set pressure, an alarm is given, and the channel experiment is terminated; Flow rate control: Each seal column is equipped with a separate sealing plug at the top to achieve high-pressure sealing, so that the solution passes through the extraction column at a set flow rate, ensuring good reproducibility and parallelism; Solvent Management System: Supports 8 reagents; Loading method: switching sample and solvent through multi-pass switching valve; Infiltration and incubation: When the activation solvent or elution solvent is loaded onto the extraction column, the liquid level can be maintained above the filler for a certain period of time to ensure full activation or elution to ensure ideal experimental results; Cleaning mode: Supports a variety of cleaning modes to ensure that sample lines are clean without cross-contamination; Waste channel: support environmental recycling waste liquid, and realize different waste liquid treatment; Extraction column specifications: Compatible with conventional 1/3/6/12mL extraction columns, other specifications can be customized according to the needs of the extraction column or disk; On-line drying/dewatering: support online nitrogen purge mode and anhydrous sodium sulfate dewatering mode; Concentration on-line: Supports in-situ nitrogen purge concentration, elution of the target without the need to transfer other equipment to concentrate; airflow flow rate and pressure control, concentration time and volume can be edited; Constant volume method: infrared constant volume; Large-volume injection: support for continuous and smooth loading of samples above 500mL without interruption, resistance to particle abrasion, corrosion resistance, without any consumables and regular maintenance; Cloud Services: support for uploading, downloading programs and parameters; support for online technical support and communication; support for remote monitoring; Appointment start: After the editing of the experimental program is completed, the start time of the self-service appointment can be used according to the analysis of the instrument. Countdown: After the start of the experiment, the countdown time, easy to grasp the end of the experiment, when matching the analytical instrument in advance; Intelligent self-check and alarm: After the parameters are set, whether there is a logic error in the software self-test, promptly modify; intelligent fault alarm system, choose to continue or stop according to the fault level; Closed system: The system is completely sealed. The solvent vapor is discharged into the fume hood through the centrifugal fan to minimize the harm of the solvent to the environment and the operators. Technical Parameters: Model: Auto SPE Pro Number of channels: 2-12 channels Channel Independent Control: Support Sample pump: Precision continuous valveless ceramic metering pump Pump flow rate: 0-200mL/min Solvent type: 8 kinds Loading volume: 0.01mL - no upper limit Receiving volume: 10-60mL Support samples: food, water quality, soil, body fluids, etc. Loading method: Multi-switching valve switching Sealing Technology: Independent Sealing Plunger Extraction Mode: Positive Pressure Extraction Extraction column pressure: 0-100psi Extraction column specifications: 1/3/6/12/15/20/60mL and other specifications extraction column Extraction tray: 47/50/90mm Online Filtering: Support Spray sample vial: Support Pressure Sensing: Support, Overpressure Alarm, Threshold Editable (0-6Bar) Column drying mode: Nitrogen purge and online anhydrous sodium sulfate dewatering dual mode Online Concentration and Constant Volume: Infrared Constant Volume Waste Collection: Branch Collection Voltage: 220V 50Hz Working temperature: 10-40°C Operating Humidity: 0-90%, non-condensing Power: 120W
Introduction: The Auto SPE Pro Automated Solid Phase Extraction System integrates the solid-phase extraction steps into a single platform and fully automates the entire SPE extraction process (activation, sample loading, elution, drying, and elution). It greatly improves the efficiency of sample preparation and frees analysts from tedious pre-treatment work to make sample preparation faster and more efficient.
