Introduction: A sterile saline ice machine is designed to meet the surgical needs and is used to continuously produce a soft, spiky ice-free ice. Such as the transport of cryo-transplanted organs for surgery or emergency surgery. It can be self-storing, easy to carry and easy to operate. No support from other equipment is required. The stainless steel ice basin meets the hospital's standard specifications. In operation, inject heat transfer media into the ice well (freezing point at -37 ° C), then add the desired disinfectant solution to the ice cube and press the control switch. When the ice mud begins to form, simply stir the solution. If the ice mud is used up, if necessary, repeat the above steps with the same volume of pre-cooled solution. Features: 1, special stainless steel ice basin With a volume of 8 liters, it is easy to handle and easy to sterilize. 2. One-touch control switch Press the control switch and the indicator will illuminate to indicate that the cooling system is running. Pressing the switch again will terminate the cooling process. 3. Ice shovel Each ice machine is equipped with an ice shovel that scrapes off the ice that remains on the basin and removes it completely from the ice basin. The ice shovel is made of special materials that can be gas sterilized or autoclaved. 4. Easy to move: Equipped with a push handle, the standard universal foot can change the position of the machine as you wish. Technical Parameters: Ice basin capacity: about 8 liters Freezing temperature: -37 °C. Refrigerant: R404A Air cooling method: ventilation of the vent of the outer casing; Power requirements: 220V/50HZ/1 phase
Introduction: A sterile saline ice machine is designed to meet the surgical needs and is used to continuously produce a soft, spiky ice-free ice. Such as the transport of cryo-transplanted organs for surgery or emergency surgery. It can be self-storing, easy to carry and easy to operate. No support from other equipment is required. The stainless steel ice basin meets the hospital's standard specifications. In operation, inject heat transfer media into the ice well (freezing point at -37 ° C), then add the desired disinfectant solution to the ice cube and press the control switch. When the ice mud begins to form, simply stir the solution. If the ice mud is used up, if necessary, repeat the above steps with the same volume of pre-cooled solution.
