Tester will be selected as stipulated in the standard glass tape paper and after test environment to adjust the sample ink printing surface, with the standard load, rolling speed and the number of rolling together, and placed to adjust time, and then at a certain pressure and stripping speed strip away with them, the situation of sample ink layer, stripped observed, then analysis the combination of the printing ink layer fastness. Technical param Brief introduction: My company produces disk stripping machine is suitable for printing ink layer combined with the strong degree of testing, the production of used in gravure printing plastic film and cellophane packaging printing (including composite film print) printing ink layer combine fastness test experiment was carried out. Can also be used for vacuum coating, surface coating, composite process related to the state of the formation of surface adhesion test. eters: Disc pressure between: 100 n Stripping speed: 0.8 M/S A disc diameter: 170 mm width: 55 mm B disc diameter: 65 mm width: 55 mm Conform to the standards: GB/T 7707-7707 the gravure packaging printing ink layer combine fastness.
Brief introduction: My company produces disk stripping machine is suitable for printing ink layer combined with the strong degree of testing, the production of used in gravure printing plastic film and cellophane packaging printing (including composite film print) printing ink layer combine fastness test experiment was carried out. Can also be used for vacuum coating, surface coating, composite process related to the state of the formation of surface adhesion test.
