Brief introduction: Blasting test stand is mainly used for radiator, condenser, evaporator, cold, warm wind core, oil cooler, heater, pressure gauges, fire equipment, metal fittings, valves, hose assembly, piping, Technical parameters: The test pressure: 0 ~ 500 mpa (can choose according to need range); Medium: LLC50 % (long-term antifreeze), water, water - ethylene glycol, hydraulic oil; Pressure rise rate: 5 ~ 200 mpa/min, can be arbitrary regulation (time units can be converted to S); Inside the test chamber size: 1.2 * 0.6 * 0.6 M (length * width * height); Number of single test specimen: 1; Test samples are diameter: 3 ~ Φ Φ 150 mm; Test sample length: 100 ~ Φ 1000 mm; Equipment colors: navy or RAL7035 ash.
Brief introduction: Blasting test stand is mainly used for radiator, condenser, evaporator, cold, warm wind core, oil cooler, heater, pressure gauges, fire equipment, metal fittings, valves, hose assembly, piping, piping, pressure vessel, pressure transmitter products such as compression, the blasting test equipment. The test parameters such as pressure, pressure rise rate and temperature can be set in the test procedure. After setting machine can finish automatically.
