GP-2000A Automatic Grinding and Polishing Machine Introduction: The GP-2000A infinitely variable speed sample grinding and polishing machine is an automatic dual disc desktop machine suitable for pre grinding, grinding, and polishing operations on metallographic samples. This machine can achieve a speed between 50-1000 revolutions per minute through a frequency converter, making it more versatile and an essential high-end intelligent device for users to make metallographic specimens. characteristic: (1) Digital display of sample preparation speed; (2) Load pressure, adjustable sample preparation time; (3) The grinding and throwing disc has two functions: three-level fixed speed/timing and stepless speed regulation; (4) The grinding disc speed is infinitely adjustable between 50-1000rpm, and the grinding and polishing head speed is infinitely adjustable between 20-200rpm; (5) Equipped with a quick replacement grinding disc and multiple sample holders; (6) Aerodynamic multi-point loading; (7) Large capacity abrasive automatic distribution system; (8) Six samples can be processed simultaneously. Technical parameters: 1. Model: GP-2000A 2. Number of grinding chassis discs: double discs Speed: 50-1000rpm Power: 750W Steering: clockwise/counterclockwise Grinding disc diameter: 8 "-10" (200/250mm) 3. Grinding head pressure method: single point pneumatic loading Speed: 20-200rpm Single point pressure: 0.1~0.4MPa Power: 250W 4. Dropping system: automatic dripping of one set 5. Maximum water pressure for water supply:<0.3MPa Inlet pipe diameter: OD=Φ 8mm Outlet pipe diameter: OD=Φ 32mm Circulating water tank: optional 6. Noise:<40dBA (measured at a distance of 1 meter) 7. Operating environment temperature: -20 ° C -60 ° C (-4 ° F -140 ° F) Humidity: 0-95% RH 8. Voltage: 110V 60Hz, 220V 50HZ 9. Clamping disc: 6x Φ 40mm, 3x Φ 50mm 10. Dimensions W × D × H: 705x698x663mm 11. Weight: 85kg
Introduction: The GP-2000A infinitely variable speed sample grinding and polishing machine is an automatic dual disc desktop machine suitable for pre grinding, grinding, and polishing operations on metallographic samples. This machine can achieve a speed between 50-1000 revolutions per minute through a frequency converter, making it more versatile and an essential high-end intelligent device for users to make metallographic specimens.
