Sales Goldy-350 industrial laser ranging sensor，Manufacturer

Position: Home > > Measurement instrument > Length measuring instrument > laser range finder > Goldy-350 industrial laser ranging sensor

Goldy-350 industrial laser ranging sensor

Product ID：CLCDcjy019

Price: Please inquire PDF Format

Supply Ability:20SETS/MON

Port:SHENZHEN

Product Introduction
Consulting

Model NumberGoldy-350

Brand NameBJHMDZ

Payment TermsT/T, paypal

Brief introduction:
The goldy-350 industrial laser rangefinder is specifically designed to measure distances of fixed or moving objects. Goldy-350 type industrial laser ranging sensor has many functions, such as air cooling, water cooling and cast aluminum protective case.
Features:
Measurement range can be up to 150 meters, more than 50 meters, the test surface must be installed reflector
Is able to maintain high accuracy and reliability in harsh outdoor environments
Adopts the principle of phase difference, the measurement accuracy is high, and the repeat precision can reach + / - 0.5mm
Programmable analog 4-20mA output (three-wire system) for easy field setting.
Via a laptop or handheld operator, you can check the working status of the meter and modify Settings on the meter parameters
Operating voltage range of 10-30v, less than 1.5w power consumption
Rs232/422 serial port for instrument debugging and signal output
USES a red laser that is easy to target and easy to adjust for maintenance.
Aluminum case, l-type mounting bracket, with shock absorber isolation rubber bolts
Golda-351 laser rangefinder, output refresh rate up to 50Hz
Technical parameters:

Measuring range	0.1-150m, Use the reflector more than 30m	Measurement accuracy	±1-2mm
Resolution ratio	0.1mm	Repeatability precision	±0.5mm
Measuring time	1-10Hz（50Hz optional）	Service voltage	10V-30VDC, polarity protection, power consumption < 1.5W
Working temperature	-10-50℃（Heating optional）	Measuring laser	Wavelength 650nm (red), divergence angle 0.6mrad
Storage temperature	-20℃-70℃	Laser grade	Level 2, don't look straight at the laser
Data interface	RS232/RS422 (convertible), baud rate 9600U ACII 8n1	Adapting piece	12 pin M18 male head, cable length 2 m, other length optional
Analog output	4-20 Ma, load impedance ≤ 500, accuracy: ±0.15, temperature drift < 50ppm/K	Sensor size	205x 145X50mm (including bracket), 3XM6 mounting hole
Switch output	Programmable, with load capacity of 0.5A	Average life	More than 50000 hours
levels of protection	P65, cast aluminum housing	Weight	1.5kg (including cables and mounting supports)

Brief introduction:
The goldy-350 industrial laser rangefinder is specifically designed to measure distances of fixed or moving objects. Goldy-350 type industrial laser ranging sensor has many functions, such as air cooling, water cooling and cast aluminum protective case.