Brief introduction: Microcomputer control cable tensile test of horizontal tensile testing machine is mainly used for fiber optic cable, used to measure the tensile properties of the fiber optic cable within the prescribed scope of tensile load, the cables of attenuation changes in the optical fiber, optical fiber strain and cable strain as a function of tensile load. Generally for non-destructive test, a tensile load should be applied within the allowed maximum tension. This machine can meet the method E1A, E1B testing requirements for fiber optic cable. Equipment by the host, a sliding wheel, fiber optic cable stretching with bracket, a fixed wheel, AEC - 1000 high performance controller, computer, etc. Can satisfy the multiple requirements of fiber optic cable tensile test. Technical indicators: Stretching the maximum load: 100 kn Stretching measuring range: 1 kn ~ 100 kn Resolution: + 5 billion yards, full range not step, resolution remains the same Accuracy: value plus or minus 0.5% Load hold time: not less than 3 hours Load bao accuracy: + / - 0.5% The displacement measurement accuracy: plus or minus 0.5% Displacement velocity accuracy: plus or minus 0.5% Displacement of the display resolution: 0.001 mm (0.000015 mm) displacement control resolution of: Tensile speed range: 0.01 to 300 mm/min, any Settings Stretch space: 25 m Effective tensile trip: 1000 mm
Brief introduction: Microcomputer control cable tensile test of horizontal tensile testing machine is mainly used for fiber optic cable, used to measure the tensile properties of the fiber optic cable within the prescribed scope of tensile load, the cables of attenuation changes in the optical fiber, optical fiber strain and cable strain as a function of tensile load. Generally for non-destructive test, a tensile load should be applied within the allowed maximum tension. This machine can meet the method E1A, E1B testing requirements for fiber optic cable.
