Introduction: The GH-6033 exhaust gas dioxin sampler is mainly used for the collection of dioxin-like substances in the emission of stationary pollution sources. Applicable to hazardous waste incineration facilities, medical waste incineration facilities and cement kiln incineration facilities for hazardous waste treatment, environmental protection acceptance of construction projects completed, dioxin monitoring in the process of supervisory testing, and domestic waste incineration facilities dioxin emission monitoring And other applicable occasions. Executive standard GB/T 16157-1996 "Determination of particulate matter in exhaust from stationary sources and sampling method of gaseous pollutants" HJ/T 48-1999 "Technical Conditions for Soot Sampler" HJ 77.2-2008 "Ambient Air and Exhaust Gas Determination of Dioxins Isotope Dilution High Resolution Gas Chromatography-High Resolution Mass Spectrometry" HJ/T 365-2007 "Technical Specification for Dioxin Emission Monitoring of Hazardous Waste (including Medical Waste) Incineration and Disposal Facilities" Technical features: 1. All interfaces of the instrument are arranged on the slopes on both sides of the upper shell of the instrument, which is easy to operate and has strong visibility; 2. 7.0-inch wide temperature multi-angle flip color touch screen, with touch screen, buttons, APP, network multi-screen cooperative operation function; 3. The buttons adopt embedded modules, which are easy to maintain, backlit, clear writing, waterproof and dustproof, wear-resistant and anti-aging; 4. Real-time display of the dynamic curve of sampled data, which is convenient for users to observe the trend of changes during the sampling process; 5. It integrates three functions of flue gas sampling, flue gas analysis, and soot sampling, which is easy to use; 6. Adopting DC brushless double-chamber large-flow sampling pump and electronic flowmeter, quick response and high tracking efficiency; 7. The main unit is equipped with a 100cm³ (gas) 320cm³ (dust) square air chamber and a large visualized filter element, which can effectively filter water and dust and is easy to replace. Built-in double drain pumps realize the automatic discharge function of condensate during the sampling process of flue gas and dust, ensuring the instrument Long-term maintenance-free and trouble-free operation; 8. The flue gas analysis can be sampled individually or at the same time for flue gas and smoke dust sampling to achieve homogenous sampling. The flue gas pipeline adopts tetrafluoroethylene pipeline without adsorption, which ensures the accuracy of the measurement results; 9. Integrated design of sensor and signal module, no need to calibrate to replace the sensor, with automatic correction function of CO interference to SO2 and NO2 to SO2 to ensure the accuracy of test data; 10. Automatic storage of flue working condition information, priority use next time boot, realizing one-key sampling; 11. The data storage capacity can reach one million groups, can be directly printed, U disk copy and print, and can communicate with the computer; 12. A composite gas dryer made of metal tubes, with a built-in 100cm³ filter element, can efficiently remove water, filter dust, and effectively protect the sampling pump; 13. Multi-level photoelectric isolation, multi-CPU fault-tolerant structure, overcome electrostatic interference, and ensure safe and reliable operation of the instrument; 14. With power-off protection function, after power-on, it will automatically enter the sampling state before power-off; 15. Fault self-checking function, convenient for users to detect, maintain and use; 16. Intelligent software design, support for Chinese character input, good human-computer interaction interface, online prompt navigation, guide users to complete operations.
Introduction: The GH-6033 exhaust gas dioxin sampler is mainly used for the collection of dioxin-like substances in the emission of stationary pollution sources. Applicable to hazardous waste incineration facilities, medical waste incineration facilities and cement kiln incineration facilities for hazardous waste treatment, environmental protection acceptance of construction projects completed, dioxin monitoring in the process of supervisory testing, and domestic waste incineration facilities dioxin emission monitoring And other applicable occasions. Executive standard GB/T 16157-1996 "Determination of particulate matter in exhaust from stationary sources and sampling method of gaseous pollutants" HJ/T 48-1999 "Technical Conditions for Soot Sampler" HJ 77.2-2008 "Ambient Air and Exhaust Gas Determination of Dioxins Isotope Dilution High Resolution Gas Chromatography-High Resolution Mass Spectrometry" HJ/T 365-2007 "Technical Specification for Dioxin Emission Monitoring of Hazardous Waste (including Medical Waste) Incineration and Disposal Facilities"
