Introduction: The new generation GDS-5A quartz clock tester is suitable for precise measurement of clock circuits in electronic products using 32768Hz and 75KHz crystal oscillators, such as quartz clocks, electronic energy meters, computer motherboards, temperature controllers, timers, electronic scales, and timing functions on electronic cash registers. It is widely used in electronic factory assembly lines for mass production, R&D department debugging prototypes, quartz clock factory verification of finished and semi-finished products, and scientific research institutes for measurement and testing. Having the new GDS-5A will bring you unexpected surprises, as shown in the above picture. The GDS-5A quartz clock tester is particularly suitable for rapid inspection of finished or semi-finished products on workshop production lines. Equipped with an RS232 interface, it can be connected to a PC to send real-time measurement data to the upper computer for statistical purposes. Another exquisite and compact probe is equipped to adapt to larger circuit board measurements. Features: 1. Sensors with ultra sensitivity make reception more sensitive; 2. Adopting non-contact methods does not require electrical connection to the tested circuit; 3. The ultra-thin shell makes the placement of the tested clock product more convenient and suitable for assembly line operations; 4. Built in fast processor and TCXO (reference clock crystal oscillator with temperature compensation); 5. Use a 16 level level indicator to visually and clearly indicate the strength of the measured signal; 6. The upper and lower limit values can be set, and if they exceed the range, an automatic alarm will be triggered; 7. The human-machine dialogue adopts rotary encoder encoding; 8. The accuracy is better than 0.2ppm. Technical parameters: Measurement range: Quartz watches, electronic product clock circuits Power supply voltage: 220V AC 50HZ Measurement frequency: 32.768KHz 75KHz Reference frequency: 16.384MHZ TCXO Measurement accuracy: better than 0.2ppm Range: Three default options, PPm (one millionth error rate), s/d (daily error), s/m (monthly error) Signal strength indication: Level 16 indication is intuitive and clear to use Alarm setting range: positive and negative 200ppm Volume: 185 x 240 x 50 (mm) Display method: Four digit LCD display
Introduction: The new generation GDS-5A quartz clock tester is suitable for precise measurement of clock circuits in electronic products using 32768Hz and 75KHz crystal oscillators, such as quartz clocks, electronic energy meters, computer motherboards, temperature controllers, timers, electronic scales, and timing functions on electronic cash registers. It is widely used in electronic factory assembly lines for mass production, R&D department debugging prototypes, quartz clock factory verification of finished and semi-finished products, and scientific research institutes for measurement and testing. Having the new GDS-5A will bring you unexpected surprises, as shown in the above picture. The GDS-5A quartz clock tester is particularly suitable for rapid inspection of finished or semi-finished products on workshop production lines. Equipped with an RS232 interface, it can be connected to a PC to send real-time measurement data to the upper computer for statistical purposes. Another exquisite and compact probe is equipped to adapt to larger circuit board measurements.
