Introduction: The GDS-5 quartz clock tester is suitable for precise measurement of timing functions on clock circuit boards, cash registers, electronic energy meters, temperature controllers, timers, electronic scales, and electronic cash registers using 32768Hz crystal oscillators. It has three ranges: ppm (one millionth error), s/d (daily error), and s/m (monthly error). Adopting non-contact method without the need for electrical connection with the tested circuit, the ultra-thin aluminum alloy shell makes the placement of the tested clock product more convenient, the sensor with a super large detection window makes reception more sensitive, and the built-in fast processor and TCXO accuracy are better than 0.2ppm. The strength of the tested signal is indicated by a 16 level level level for intuitive and clear use, and the upper and lower limit values can be set. If it exceeds the range, it will automatically alarm, The GDS-5 quartz clock tester is particularly suitable for rapid inspection of finished or semi-finished products on workshop production lines. Technical parameters: Measurement range: Suitable for clock circuits using 32.768kHz crystal oscillators, such as electronic clocks, electronic timers, electronic temperature controllers, electronic scales, remote controls, electronic calendars, cash register motherboards, and all other electronic products with time display functions. Power supply voltage: 220V AC 50HZ Measurement frequency: 32.768KHz Reference frequency: 16.384MHZ TCXO Measurement accuracy: better than 0.2ppm Range: Three default options, PPm (one millionth error rate), s/d (daily error), s/m (monthly error) Signal strength indication: Level 16 indication is intuitive and clear to use Power switch mode: soft start Alarm setting range: positive and negative 200ppm Sensor: flat type Volume: 215 x 300 x 56 (mm) Weight: 2.3kg Display method: Three digit digital display
Introduction: The GDS-5 quartz clock tester is suitable for precise measurement of timing functions on clock circuit boards, cash registers, electronic energy meters, temperature controllers, timers, electronic scales, and electronic cash registers using 32768Hz crystal oscillators. It has three ranges: ppm (one millionth error), s/d (daily error), and s/m (monthly error). Adopting non-contact method without the need for electrical connection with the tested circuit, the ultra-thin aluminum alloy shell makes the placement of the tested clock product more convenient, the sensor with a super large detection window makes reception more sensitive, and the built-in fast processor and TCXO accuracy are better than 0.2ppm. The strength of the tested signal is indicated by a 16 level level level for intuitive and clear use, and the upper and lower limit values can be set. If it exceeds the range, it will automatically alarm, The GDS-5 quartz clock tester is particularly suitable for rapid inspection of finished or semi-finished products on workshop production lines.
