GCWP-A Dielectric Temperature Spectroscopy Measurement System Introduction: The dielectric temperature spectrum measurement system is applicable to various metal oxides, plates, ceramics (pottery), mica, glass, plastics, and other important physical properties. Through measurement, various factors affecting dielectric loss and dielectric constant can be further understood, providing a basis for improving the performance of materials. This instrument is used in research institutions, universities, factories and other places to conduct application research on the properties of inorganic metal new materials. It measures the dielectric constant of a medium in a special environment at that temperature. Technical parameters: Electrode diameter: 6mm Quantity: 4 Motor shielding: inner diameter -304 stainless steel outer diameter - PTFE Test electrode: four channels, capable of simultaneously testing four samples Switching frequency: You can freely set the sample switching time Test method: manual mode, automatic mode Test data: can export raw test data, output test curves, and print test reports Measurement frequency: subject to the actual bridge Temperature range: -180 °~500 ° Heating rate: 0.5 ℃ -2.5 ℃/min Data cable: copper silver plated, low-temperature shielded wire Case: Made of Q235 steel plate surface with high-temperature spray molding Instrument power supply: AC: 220V 50Hz Power: 2KW Test bridge: Agilent 4294 Test environment: Please do not use in dusty, vibrating, direct sunlight, or corrosive gases.When using the instrument, it should be kept away from strong electromagnetic fields to avoid interfering with the experimental results.
Introduction: The dielectric temperature spectrum measurement system is applicable to various metal oxides, plates, ceramics (pottery), mica, glass, plastics, and other important physical properties. Through measurement, various factors affecting dielectric loss and dielectric constant can be further understood, providing a basis for improving the performance of materials. This instrument is used in research institutions, universities, factories and other places to conduct application research on the properties of inorganic metal new materials. It measures the dielectric constant of a medium in a special environment at that temperature.
