GB-M2 Leakage Tester Introduction
Sealing instrument GB-M2 is designed and manufactured in accordance with the relevant provisions of GB/T15171 flexible packaging sealing performance test method. It is used to detect the sealing condition of plastic packaging bags and packaging containers, and is used in packaging, food, medicine, and daily chemical industries. Through the test, the sealing process and sealing performance of the package can be effectively compared and evaluated, and the scientific basis for determining the relevant technical indicators is provided. The sealing performance test of the test piece after the drop and pressure test can also be carried out.
Implementation standards: GB/T 15171-1994, ASTM D3078-2002 (2013) Features
Use compressed air for pneumatic drive.
Fully automatic test, automatic vacuuming, maintaining set time, automatic stop and inflation return.
Can be manually paused and ended manually.
LCD display showing test parameters and working status. Technical parameters
Vacuum degree: 0~ -95kPa
Vacuum accuracy: ±1% (indication error)
Vacuum holding time: 0.1~60 min
Compressed air pressure: 0.4~0.6 Mpa (4~6 kgf/cm2)
Compressed air consumption: 20 L/min
Power supply: 220 V 50 Hz
Instrument size: Instrument size: 317*305*170mcm
Vacuum barrel size: Ø300 × 300mm (small barrel)
Ø450 × 350mm (medium barrel)
Net weight: 12 kg
Operating ambient temperature: 10~40°C
Vacuum degree: 0~ -95kPa
Vacuum accuracy: ±1% (indication error)
Introduction
Sealing instrument GB-M2 is designed and manufactured in accordance with the relevant provisions of GB/T15171 flexible packaging sealing performance test method. It is used to detect the sealing condition of plastic packaging bags and packaging containers, and is used in packaging, food, medicine, and daily chemical industries. Through the test, the sealing process and sealing performance of the package can be effectively compared and evaluated, and the scientific basis for determining the relevant technical indicators is provided. The sealing performance test of the test piece after the drop and pressure test can also be carried out.
Implementation standards: GB/T 15171-1994, ASTM D3078-2002 (2013)
