GAINLASER low power nanosecond UV laser Introduction: The low-power nanosecond laser can provide 1, 2, 3W TEM00 mode 355nm UV laser output at 30KHz repetition rate to meet the UV laser output power requirements of different processing applications. The optimized design of the laser crystal heat dissipation technology expands the stability zone width of the laser, and the 355nm ultraviolet light output power is widely adjustable. The red light indicator can be integrated as needed, and the laser head can be separated from the power box, and the installation and maintenance are simple and convenient. Through the introduction of the production process without adjustment frame, the laser mechanical performance is reliable and can be operated stably for a long time. Features: 1. Integrated design; 2. Strong mechanical stability; 3. Strong resistance to external temperature interference; 4, the beam quality is good; 5, high long-term work stability, 24/7 industrial grade application; 6, CLASS 1000 clean room installation; 7, RS232 remote computer control; 8, external TTL and PWM control; 9. The repetition frequency is adjustable from 10 to 150 kHz. Technical Parameters: Wavelength: 355nm Output power: > 2/3W@30KHz Maximum single pulse energy: 0.1mj@30KHz Pulse repetition frequency: 10-150KHz Pulse width: < 15ns@30KHz Pulse stability: < 3 % Average power stability: < 3 % Spatial mode: TEM00 (M2 <1.2) Degree of polarization: >100:1 Spot size before beam expansion /1/e2: 0.8mm Spot roundness: > 90 % Cooling method: water cooling Warm-up time: < 15 minutes Ambient temperature: 18 ° C - 35 ° C Storage temperature: -10 ° C - 50 ° C
Introduction: The low-power nanosecond laser can provide 1, 2, 3W TEM00 mode 355nm UV laser output at 30KHz repetition rate to meet the UV laser output power requirements of different processing applications. The optimized design of the laser crystal heat dissipation technology expands the stability zone width of the laser, and the 355nm ultraviolet light output power is widely adjustable. The red light indicator can be integrated as needed, and the laser head can be separated from the power box, and the installation and maintenance are simple and convenient. Through the introduction of the production process without adjustment frame, the laser mechanical performance is reliable and can be operated stably for a long time.
