G600-1L industrial peristaltic pump Introduction: The G600-1L series products are industrial peristaltic pump drivers specifically developed for harsh industrial application environments; Compact structure, simple design, and very compact appearance; Has strong electromagnetic compatibility performance and will not be affected by electromagnetic environment interference; Multiple Lange peristaltic pump heads can be assembled and matched with hoses of various specifications. characteristic: 1. Supports multiple transmission modes: continuous transmission, single timed transmission, single quantitative transmission, and maximum speed transmission 2. Calibration function: Supports flow or liquid volume calibration 3. Support multiple parameter displays: speed, flow rate, time, and liquid volume parameters can be displayed separately on different pages to meet different display needs of customers. 4. Supports multiple control methods: button control, RS485 communication control, external signal control. Technical parameters: Speed range: 0-650rpm Speed adjustment resolution: 0.01rpm (<10rpm) 0.1rpm (10rpm ≤ speed ＜ 100rpm) 1rpm (100rpm ≤ speed ≤ maximum speed) Working modes: continuous mode, single timed mode, single quantitative mode Display parameters: speed, flow rate, single run time, single transfer liquid volume parameters Control modes: button control, communication control, external signal control, and foot pedal control Operation and display: Function keys: start stop key, direction key, confirm/full speed key, "+", "-" keys, unit key; Display: Segment code LCD display Button lock function: Enable can be set, automatic screen lock time can be set from 5s-1min without operation Power on operation status: adjustable, the state before power on stop or power off recovery can be set (continuous transmission mode) Parameter Memory: Save operational and system parameters (with a storage delay of approximately 1 second) Communication interface: RS485 communication interface, communication address, baud rate, and parity can be set External control function: External input signals can control the start stop status, direction status, and speed. Speed control: External speed control is compatible with multiple signal types including 0-5V, 0-10V, 4-20mA, and 0-10KHz Start stop and direction control: direction control, start/stop control, supports pulse and level triggering External control parameter setting: Through communication function, external control parameters such as maximum speed, speed signal type, analog signal range corresponding to speed, external control speed range, start stop, and direction signal triggering method can be configured IP rating: IP66 Power supply: Suitable power supply: AC100-240 50Hz/60Hz Power: 60W Working environment: Working temperature: 0 ℃ -40 ℃, relative humidity: 10% -90% Noise: less than 70dB Dimensions (excluding pump head): 240 * 142 * 152 (mm) (L × W × H) Weight (excluding pump head): 3.75kg
Introduction: The G600-1L series products are industrial peristaltic pump drivers specifically developed for harsh industrial application environments; Compact structure, simple design, and very compact appearance; Has strong electromagnetic compatibility performance and will not be affected by electromagnetic environment interference; Multiple Lange peristaltic pump heads can be assembled and matched with hoses of various specifications.
