G300-3F Industrial Filling Peristaltic Pump characteristic: 1. Aluminum alloy shell, anti-corrosion paint treatment, extends the service life of the pump in harsh environments. 2. Good electromagnetic compatibility performance, neither affected by electromagnetic environment interference nor interfering with other electronic devices around it 3. High protection level, suitable for humid and dusty environments 4. High quality electronic components, optimized software and hardware design ensure long-term reliable and stable operation 5. Through high-precision speed control (with a resolution of up to 0.1rpm), high-precision flow control can be achieved Technical parameters: Speed range: 0rpm-300rpm, reversible in both forward and reverse directions Speed adjustment resolution: "Speed 0-100 (rpm), adjustment resolution is 0.1rpm Speed 100-300 (rpm), adjust resolution to 1rpm“ Display mode: LCD screen Control methods: button control, external signal control, and communication control Working modes: traffic mode and distribution mode Flow mode: Display flow rate, pump runs continuously according to the set flow rate Flow correction: Input the actual flow value and automatically perform flow correction. The correction time can be set Flow setting range: 1.000mL/min-9999mL/min Distribution mode: Continuous automatic quantitative distribution is carried out according to the set distribution liquid volume, distribution frequency, interval time, and suction angle. Distribution correction: Input the actual distribution liquid volume and automatically perform distribution liquid volume correction. The correction time can be set Distribution volume range: 0.1mL-9999L Allocation times: 0-9999 Allocation interval time: 1sec-99.9min Retraction angle: 0-9.9 turns, adjust resolution to 0.1 turns External control function: "Start stop control/direction control: level signal control mode, compatible with 5V and 12V levels Speed control: 0-5V, 0-10V, 0-10kHz optional, unified interface“ Status output function: Provides a status output interface that can output the start stop status (OC gate signal), direction status (OC gate signal), and rotation speed (125-7500Hz linearly corresponding to 0.1-300rpm) of the pump Communication interface: RS485 Power off memory: After powering on again, work can continue according to the state before the power off. Foot switch control: Optional foot switch accessory can be used to control the start and stop of the pump through the foot switch Dimensions (length * width * height): 360mm × 215mm × 243mm Applicable power supply: AC220V ± 10%/120W, 50-60Hz Working environment temperature: 0 ℃ -40 ℃ Relative humidity of working environment:<100% Protection level: IP65 Weight: 12kg
characteristic: 1. Aluminum alloy shell, anti-corrosion paint treatment, extends the service life of the pump in harsh environments. 2. Good electromagnetic compatibility performance, neither affected by electromagnetic environment interference nor interfering with other electronic devices around it 3. High protection level, suitable for humid and dusty environments 4. High quality electronic components, optimized software and hardware design ensure long-term reliable and stable operation 5. Through high-precision speed control (with a resolution of up to 0.1rpm), high-precision flow control can be achieved
