G01NET-3G high-precision wireless acquisition instrument Brief introduction: The G01NET-3G high-precision wireless acquisition instrument is a dynamic data acquisition instrument with monitoring data synchronization collection, on-site storage, real-time data upload, and 4G wireless transmission functions. This acquisition device has 8 channels for analog input and a 24 bit conversion accuracy; Support GPS and NTP methods for timing the acquisition instrument; This data acquisition device has the function of remotely modifying the operating parameters inside the SD card, copying data remotely, and monitoring the storage space of the SD card. Application scope: blasting monitoring, earthquake monitoring, microseismic monitoring, and safety monitoring of building structures such as wind turbine towers. Characteristic: 1. High precision; Using a 24 bit high-precision conversion chip to improve sampling accuracy 2. Low power consumption; Selecting high-quality CPUs to incorporate green and low-power concepts into global design, greatly reducing power consumption 3. Small volume; The volume of 186 * 176 * 52 (mm) increases the flexibility of use and makes equipment installation more convenient 4. Real time collection of data, triggered storage of data, and real-time transmission of data; Trigger threshold can be set and data can be automatically stored on the SD card. Real time data is transmitted via 4G, and the dual antenna design provides more stable signals 5. Global real-time positioning and altitude measurement functions; Real time positioning and acquisition instrument for longitude and latitude, calculating the current altitude value, with comprehensive information Technical parameters: Model: G01NET-3G Analog signal input channel: 8 channels (default single ended input, supports differential input) Input range and resolution: -10~10V/0.005mV Sampling frequency: can be set to 1~2000Hz (all channels are completely synchronized) Storage capacity and format: Storage capacity: standard 16G SD card, data storage format: binary Remote data transmission: using 4G wireless transmission technology Transmission data type: Real time transmission of raw data Timing: GPS, NTP Dynamic range: ≥ 120dB Power supply: DC12V Power consumption: 6 watts Size (L * W * H, mm): 177 * 182 * 44 (Installation hole spacing: 153 * 68mm, it is recommended to use a nut with a size of 11mm to fix the acquisition instrument) Input impedance: 1K Ω/1M Ω Working temperature: Temperature: -35 ℃~+70 ℃ Humidity: ≤ 90% On site data storage triggering mode: amplitude based triggering
Brief introduction: The G01NET-3G high-precision wireless acquisition instrument is a dynamic data acquisition instrument with monitoring data synchronization collection, on-site storage, real-time data upload, and 4G wireless transmission functions. This acquisition device has 8 channels for analog input and a 24 bit conversion accuracy; Support GPS and NTP methods for timing the acquisition instrument; This data acquisition device has the function of remotely modifying the operating parameters inside the SD card, copying data remotely, and monitoring the storage space of the SD card. Application scope: blasting monitoring, earthquake monitoring, microseismic monitoring, and safety monitoring of building structures such as wind turbine towers.
